Electronics Forum | Mon Oct 30 20:24:35 EST 2006 | davef
As we understand it, you: * Get some nice BGA from your supplier * Find BGA to be packaged properly * Bake the BGA for 24 hours at [what temperature?] to reduce the potntial for damaging moisture sensitive components during following processes * Remo
Electronics Forum | Mon Apr 13 09:27:28 EDT 2009 | hxr6038
We had an issue with the finish, PCB manufacturer is telling that they had a problem with the Nickel rework, which resulted in 20% fall out. Please help me by providing the ENIG thickness for Flex boards, is it same as rigid boards as per IPC 4552. I
Electronics Forum | Wed Nov 07 21:36:17 EST 2012 | davef
Multiple process and rework thermal cycles are brutal on boards and components. Improving reliability of products through reducing thermal stress ends-up being a major driver to the interest in lower MP LF solders. Binary LF solders require the addit
Electronics Forum | Fri Sep 03 16:43:13 EDT 2021 | djenkins62
Hello Everyone, We are building devices to remove moisture from boards prior to rework where it does not require the use of ovens as stated in IPC-TM-650, Method 2.6.28. Instead of evaporation, we use moisture magnets to pull out the part......even
Electronics Forum | Thu Jun 20 15:50:04 EDT 2002 | dason_c
Dave mention b/4 to me, we don't have any industrial standard for the BGA rework. One of my customer request us to bake at 125C for 6 hours b/4 rework. I am lucky and we don't have the component which you are using. I did a evaluation and we found
Electronics Forum | Mon Aug 12 12:05:35 EDT 2002 | russ
I use Paste for high temp balls and/or co-planarity/warpage issues. normally I only use paste flux for ball attachment. One down side to paste application is registration and volume anomalies with those little micro-stencils (for me anyway). Your
Electronics Forum | Tue Sep 14 19:47:16 EDT 2004 | davef
use something other than HASL. "The rest of the world seems to be processing with no problems..." [Hello!!! Earth to Carol. This is a test.] Things you are considering could be more trouble than they�re worth. "1) Reduce via hole size" [If you re
Electronics Forum | Thu Nov 10 10:45:32 EST 2011 | aqueous
The use of IPA in automated defluxing systems is nearly extinct for the following reasons: 1. IPA is flammable. In a spray-in-air environment, the already low flashpoint is even lower. 2. IPA is not a great solvent. There are specific containme
Electronics Forum | Thu May 30 13:46:00 EDT 2002 | davef
Consider NOT getting involved in those little POS chunks of sheet metal. * They're expensive. * You never have the one you need. * Even if you DO have the item you need, you probably will not be able to locate it. * It's all but impossible to c
Electronics Forum | Sun May 17 13:46:30 EDT 1998 | Steve Gregory
Hi All! I've been reading this conversation which prompted me to break out the IPC-SM-786A from the IPC manuals from our parent company in Maryland sent us (we're just starting up in California). It's the Procedures for Characterizing and Handling of