Electronics Forum | Tue Nov 01 11:13:21 EDT 2022 | singert1980
Sophy, Thank you for the response, but we've got it figured out. The sensor was just low enough that it would see the board as it came in, but once it clamped in the BUT it would lose it. I simply raised the sensor up roughly 1/16" and it has been
Electronics Forum | Wed Nov 02 17:32:11 EDT 2022 | proceng1
I would suggest finding a USED Samsung SM482 or similar. As far as flexibility, we regularly do work orders of less than 25 assemblies. In fact, we have an SMT line basically catered to low volume runs. We are in Pennsylvania, so we aren't local, but
Electronics Forum | Tue Dec 13 07:13:28 EST 2022 | bukas
same happens with older series. clean connectors again, also clean slots. once(out of 100 times) i had this problem on my CP45 and it turned out to be corrupted data on HDD. so good luck, dont think out of box, think out of room.
Electronics Forum | Tue Dec 13 19:33:06 EST 2022 | proceng1
Does yours have the removeable hard drive that unlocks with a key and the whole thing comes out? Try plugging the HDD directly in, and don't use the adapter part. It's kind of tricky, but I was told by the service techs that a bunch of those adapt
Electronics Forum | Wed Dec 14 07:09:15 EST 2022 | bukas
yeah that ok but, MARK5 or other MARK programs dont contain drivers for communication card, its called LANGO or something like that. if cleaning connectors and slots doesnt work try fresh install if you dont have HDD image. but first clean connectors
Electronics Forum | Sun Jul 09 09:54:21 EDT 2023 | recard
Hi guys. Maybe it helps someone. We solved almost all issues on our machine with changing the capacitors arround the processor on our motherboard. We first suspect the Power supply and decided to use two power supplies, one for the MB and the other o
Electronics Forum | Thu Feb 22 11:15:01 EST 2024 | eurolan
I am not sure exactly which manuals you mean. Here are the ones I have as files: https://www.eurolan.net/datasheets/cp45fvneo/ If I could somehow help you let me know. We have such a machine for over 10years.
Electronics Forum | Thu Feb 22 11:15:29 EST 2024 | eurolan
I am not sure exactly which manuals you mean. Here are the ones I have as files: https://www.eurolan.net/datasheets/cp45fvneo/ If I could somehow help you let me know. We have such a machine for over 10years.
Electronics Forum | Sun Apr 13 02:36:06 EDT 2014 | alexeis
Hi, We have system called Setup Center for Samsung that can give a solution to your needs. It loads samsung files, including before and after optimization, and gives you feeder list splitted by machine and side (Front/Rear). Also, you can go over on
Electronics Forum | Wed Oct 10 09:55:33 EDT 2018 | dnachristen
Hello! I have a calibration jig that handles both Philips / Assembleon and Samsung feeders. I have a power supply hooked up for the Samsung feeders, but would like to know if anyone has the pinout for those feeders so I can rig some kind of electroni