Electronics Forum | Thu Apr 02 12:21:56 EST 1998 | Justin Medernach
| I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? Mike, They sell all sorts of reparation kits for this type of problem. Liquid mask can come in many forms. The easiest to use is probabl
Electronics Forum | Thu Apr 02 11:27:49 EST 1998 | Mike c
I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions?
Electronics Forum | Fri Apr 03 08:26:58 EST 1998 | Scott Cook
| I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? Why not use an electonic grade 5 minute epoxy? As long as it's inert, I'd do it. Scott
Electronics Forum | Sat Apr 04 15:28:36 EST 1998 | Use one of our UV cure conformal coatings
| | | I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? | Why not use an electonic grade 5 minute epoxy? | As long as it's inert, I'd do it. | Scott
Electronics Forum | Wed Apr 15 15:24:40 EDT 1998 | D.Lange
| I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? Try this stuff no mix no mess comes in green and clear and maybe other colors. Dries readily at room temp and is in pen form for easy disp
Electronics Forum | Fri Jan 29 16:17:13 EST 2021 | donnie15
The impact is low on larger pitches and pad sizes. as things get to the .4mm pitch the pad differences start affect your ball size and yields. The trace size going into the pads and the solder mask relief can cause some odd shaped pads with signif
Electronics Forum | Fri Jan 22 16:03:17 EST 2021 | SMTA-64387124
Does anyone see any issues in mixing SMD and NSMD pads within one BGA footprint. We have high current pads which we want to make SMD and the other signal pads to be NSMD
Electronics Forum | Tue Feb 09 16:53:06 EST 2021 | SMTA-64387083
The size of the pad changes among the two. A solder mask defined pad will always be larger than a copper defined by your mask expansion setting. This will affect paste volume, if your standard paste aperture is designed for copper defined pads you m
Electronics Forum | Tue Apr 26 05:04:10 EDT 2005 | siverts
Sorry for my blackout, but here it comes: Solder paste: Senju 7100-GRN360-K1MK-VS Sn 95.5 Ag 3.9 Cu 0.6 Solder wire: Kester 24-7040-8834 Sn 96.5 Ag3.5 Regards,
Electronics Forum | Fri Apr 29 13:37:46 EDT 2005 | russ
What core size are you using with the solder wire? I would recommend that you use a "66". It is very helpful to get the area hot prior to adding the solder.