Electronics Forum | Thu Apr 15 16:13:13 EDT 2004 | pjc
Best recommendation is to compare the two machines with your boards and stencils. Either vendor should be able to arrange for a �test drive� at one of their demonstration facilities or at a local friendly customer. I�m afraid that your request for �o
Electronics Forum | Mon Apr 26 14:42:47 EDT 2004 | Kirk
so the first PCB if i want to aligned with stencil is manual the same for screen printer without vision and vision starts work for next boards? or i am wrong? but if i make mistake during aligment process for the first PCB i will repeat it for next P
Electronics Forum | Mon Apr 26 08:15:37 EDT 2004 | pjc
MPM uses a one-print-Mylar system, as do other printer mfrs. In this system there is a Mylar sheet attached to a frame that is secured over the printer table with the board on it. You print onto the Mylar. The table X-Y-theta manual adjustments are u
Electronics Forum | Mon May 13 03:37:41 EDT 2019 | relaycz
Hi, I work at an electronics manufacturing company and right now, we are selecting a new screen printer instead of our old Samsung SP-450. Does anyone have some experience with these machines or at least manufacturers? These ones are basic and sim
Electronics Forum | Wed Nov 03 16:35:03 EDT 2021 | smtusa
We are big mpm fans especially the UP2000/2500 dos based. I just got an MPM SP2000 but feel thats too big. I would like something even smaller for an office setup. I looked up the MV100 and it came up with a pic of Quad. It looked pretty big in p
Electronics Forum | Fri Apr 16 15:25:01 EDT 2004 | ianlg
Hi Debi You might like to also include the R29-V which is a step up from both the Dek 248 and Microflex but at a similar price. 29" frame size ( multi-purpose adp available ) Bespoke software windows based, Incredibly easy to operate. Similar toolin
Electronics Forum | Fri May 09 14:56:37 EDT 2008 | markhoch
The paste dispensers work well as long as the humidity in your shop is properly controlled. If it gets too humid, and the paste gets "soupy", then it will take less air pressure to dispense it onto the stencil. Paste dispensers use a controlled, pre-
Electronics Forum | Fri Feb 06 15:52:18 EST 2004 | pjc
SPM is superior in terms of technology and application. SPM has larger print area, up to 20� x 19", vs. 17.7� x 15.7� for the MicroFlex. MicroFlex is microprocessor controlled while the SPM has a PC. SPM can print down to 12mil (0.3mm) fine pitch no
Electronics Forum | Thu Apr 29 16:58:00 EDT 2004 | pjc
You should be able to get a one-print Mylar frame for the SMTech 90 machine from SigmaPrint, http://www.sigmaprint.co.uk Yes, with vision you store images of two features such as solder lands or fidicial marks from opposite corners of the board. With
Electronics Forum | Mon Oct 23 14:10:35 EDT 2006 | realchunks
No doubt. Now they post and wait an hour and then advertise. Everyone should answer "We had one of their stencil printers and it was the worst."
