Electronics Forum | Fri Oct 28 02:18:03 EDT 2022 | kamedatec
I bought a YV100XG machine with AutoTC (Automatic Tray Feeder), Everything is working except AutoTC, when I active this function, pops up the error that the Servo Motor LZ1 was not found. I changed the control card of the servo motor, checked the wir
Electronics Forum | Tue May 02 13:29:13 EDT 2000 | Stefan Witte
Hallo Erhard, this appears to be a common task for the manufacturer of taping machines. These machines pick from a bowl feeder or from a wafer and place into tape or tray. Check Ismeca, Viking and others. If you are looking into a custom made solutio
Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan
This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.
Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Fri Jul 21 14:47:53 EDT 2017 | sumote
I commend you for doing your diligence. It sounds like you have a solid plan, and a few decisions to make. I have used Assembleon machines before, a Topaz X and a Emerald X. They seem to be a good compromise between speed and cost. If you are close
Electronics Forum | Mon May 01 11:51:24 EDT 2000 | Erhard Hofmann
A while ago I read an article about a machine that can pick up a bulk case and then place components out of it without having to travel to a feeder pick up position in between. I forgot where I read this and who the manufacturer was. Can anyone help
Electronics Forum | Sun Oct 08 00:02:58 EDT 2017 | sarason
I see this thread has altered a little from the original question to what the Op was actually getting at which is how do you know it is right? Specifically rotation on the board and how that relates to how it came from the feeder or tray. There is a
Electronics Forum | Thu Jul 15 22:24:48 EDT 2004 | rohman23
I am interested in getting feedback from anyone who has or is reeling different parts on the same reel for pick and place. Our department is extremely high mix, extremely low volume. I am also very new to surface mount, and any experience with this
Electronics Forum | Fri Jul 16 09:03:40 EDT 2004 | russ
A couple of thoughts, 1. buy larger quantity reels and load more trays of the same P/N if your problem is replenishing the machine. 2. If you're talking about changeover I would suggest that the feeders be set up in the kitting process and deliverd
Electronics Forum | Mon Feb 26 10:02:27 EST 2007 | Cal
Pay Recyclers: Ecological Technologies, Inc. 1230 Oakmead Parkway, #308 Sunnyvale, California 94085 U.S.A Phone: 408.524.7100 ;Fax: 408.524.7103 http://www.eco-tech.com/index.shtml OR The SemiCycle Foundation 2111 Kramer Lane Austin, Texas 78758
.gif)
