Electronics Forum | Mon May 14 15:20:35 EDT 2001 | stefwitt
You can make up a plate over lapping the tape exit guide and to the right up to the nozzle changer. It should hold three standard size Jedec trays. I used the bases of two old vibratory feeder. No matter what you do, you should use strong magnets to
Electronics Forum | Fri Oct 28 02:18:03 EDT 2022 | kamedatec
I bought a YV100XG machine with AutoTC (Automatic Tray Feeder), Everything is working except AutoTC, when I active this function, pops up the error that the Servo Motor LZ1 was not found. I changed the control card of the servo motor, checked the wir
Electronics Forum | Fri Jul 31 17:03:21 EDT 2009 | isd_jwendell
My Essemtec machine can use "restband" feeders. They are manual feeders that simulate trays, but are specifically made to hold tapes.
Electronics Forum | Tue Mar 09 14:56:27 EST 2004 | Alan
I have a need to put many different Tape and Reel parts into trays in order to free up feeder space on my QP3. My question is does anyone know of any resources where I can specify my part dimensions and have tray stock milled out to present these pa
Electronics Forum | Thu Jan 12 16:32:35 EST 2006 | Cmiller
The lightning head will place parts up to 30mm square but there is a height restriction and it will only pick from tape feeders, no trays, no vibes. It will put down QFP's at full speed and the placements are dead on. I think you need an optional p
Electronics Forum | Thu Dec 31 12:32:29 EST 2009 | vetteboy86
Thank you very much for the input. I figured out my problem to be that once I defined the tray, I did not changeover the table top just as Bob said. I'm good to go now, I think anyways. I was so used to the IQ feeders, changing over the matrix tray
Electronics Forum | Tue Aug 20 14:18:06 EDT 2002 | larryk
Kevin, I saw a few months ago in a Philips pamphet that they now have a "tray" that sits at the feeder locations for loose components or a small tape of components. I think it was for the Topaz machine.
Electronics Forum | Wed Nov 27 18:10:41 EST 2002 | andrewbrook
Quad4C's have their moments. If the price is right and you are aware of the machines limitations then you will be satisfied. The placement rate is slow, 1.2 seconds/chip. Don't buy any Quad if it has the CyberOptics Laser unit, the Quadalign unit is
Electronics Forum | Mon Aug 01 08:54:39 EDT 2022 | spoiltforchoice
You should get good service support and reliability from all of them, provided your local distribution agent is a good one. In the UK for instance I would trust all 3 on that front but I would expect very different support pricing structures. Any ma
Electronics Forum | Fri May 30 12:51:29 EDT 2003 | JB
I need info on loose pin vibratory feeders for Universal GSM. At this time we are presenting them in Matrix trays, and the cycle time is killing us. Any info on aftermarket Vibe feeder Companies would be great. Thanks JB
.gif)
