Electronics Forum | Wed Oct 08 23:49:29 EDT 2003 | cngodles
I need to wire some LED's. I have a pair installed in my headlights that use some sort of small thing at the end of the wire. They run off of the 12 volt car battery. They can stay on for over a month without starting the car and still not drain the
Electronics Forum | Wed Jul 28 10:29:20 EDT 2004 | johnthor
They are 6 volt, 10 watt bipin halogen and not hard to get. You do need to retain the metal housing. Take the screw out of the small pc board where the pins of the bulb project and pry it off. Scrape or grind out the hard material that holds the b
Electronics Forum | Mon Sep 20 21:37:14 EDT 2004 | Hayden
Hi folks, I currently use the supermole gold to do all my SMT relfow profiles. However, I've lost the charger for the supermole battery pack. If someone also use this tool and have their charger handly, would you please look at your charger and give
Electronics Forum | Mon Dec 12 18:03:15 EST 2005 | Diane
Yes to be quite frank and stright foward your trash cans and bags do affect ESD. Esd also tends to jump thereore you do not actually have to touch the parts to create electrial overstress to the parts. As was mentioned in a previous posting there a
Electronics Forum | Mon Oct 31 06:55:55 EST 2005 | bobpan
The machine is a chip shooter only. I would use it for that purpose only......if you want a quad that will do fine pitch get a 2c or 4c. The machine should be able to use the old 5 volt feeders but.......dont know if snap on feeders will work on it.
Electronics Forum | Fri Mar 03 20:45:58 EST 2006 | KEN
I have used KIC data acquisition equipment for over 11 years. Slim kic, sideKic and Kic2000, prophet etc... The 9 volt battry changes in seconds. Gimme a break. The internals don't reach 54Celsius. If it came down to batteries, I bet KIC would t
Electronics Forum | Fri May 12 13:33:27 EDT 2006 | mika
...Ehhhh?? Mark Fick, If the SMT Splice Clips or Kapton tapes does not solve Your DEK-265 motor comms failure problem, maybe try this: The 5 Volts should be within +/- 0.05 V. and if I remember correctly it must Not be under 4.5 V. We have been th
Electronics Forum | Sat Aug 09 07:51:40 EDT 2008 | davef
From the sound of things, the part has the correct polarity. More correctly, your placement program has the part rotated 180*. It's not uncommon to receive parts from a supplier that are rotated from order to order. Consider revising your first piece
Electronics Forum | Sat Aug 09 19:25:07 EDT 2008 | thaqalain
Thanks for reply Thats in my mind to remind Process team to modify MPI. We already having some trouble with other components and my eyes were focused on specific problems +what was specifiewd in MPI to be see closely. Do you think we need to revise
Electronics Forum | Wed Jan 21 09:33:41 EST 2009 | pigsinspace
Ok. As you know the machines changed a bit after 95 due to CE regulations. There are no drawing on board/box level in Panasert machines. However normaly i`ts the 100 volts thats "shorting out" the machine and shuts it down. Check all cooling fans a
