Electronics Forum | Sun Nov 22 18:03:38 EST 2015 | ttheis
Hi Deni- Thanks for the reply. I'll try to figure out what vision system is on it. I know it has two 5.3mil cameras front and back, UPS 3.2.2c os/2. Where do I determine the type of vision system; in the computer or harware spec plate?
Electronics Forum | Tue Aug 02 10:46:03 EDT 2016 | proceng1
We are getting more and more customers wanting LED boards built on White Solder Mask. Well our printers do not get as much contrast between the white mask and the plated fiducial pad, and often the camera only sees white. Other than playing with
Electronics Forum | Thu Sep 15 06:45:26 EDT 2016 | awhite
Hi Ariss_T, Thanks! I actually did check that...that was one of my first thoughts as well. While in the I/O, I slide a raw board back and forth under the camera/sensor and it acted appropriately. I will definitely update this thread as new informa
Electronics Forum | Sat Aug 26 09:40:27 EDT 2017 | v037022
Dear, My current method incluce steps below: 1. take out all screw 2. Put them into alcohol 3. Clean it with bemcot paper which wet by alcohol 4. Dry it by air gun 5. Checking by Dino camera. It took so much time. Now i want to do it automatic to red
Electronics Forum | Wed Jan 17 07:08:50 EST 2018 | emeto
Yeah, your machines are probably even older generation. I can tell you that what you can see is always more clear than what the machine can see(worked with 10 brands and probably 30 models). If you don't have good lighting and camera, some parts jus
Electronics Forum | Wed Jan 31 14:36:18 EST 2018 | prdmm1
what is the best type of fiducial to use when making a PCB? currently the engineer at my job is using a square fiducial on the track layer and it is covered in masking. the camera doesnt pick it up correctly due to the shadow around it. and usually a
Electronics Forum | Tue Mar 06 06:58:29 EST 2018 | griinder
Thank you guys for your help and detailed explanations. I have successfully been able to teach pads as fids. The camera view is very annoying, but manageable. Especially when teaching inspection positions. On the momentum's we can use Gerber EZ Teac
Electronics Forum | Thu Mar 08 08:59:22 EST 2018 | reckless
It seems Universal Instruments is local to me but I have heard the gsms are maintenance proned. I found one with a brand new head and upgraded camera for $5k. Even if I spend $5k in repairs I'm still ahead. Juki seems to dominate east and west coa
Electronics Forum | Fri May 11 16:06:09 EDT 2018 | aj
answers: The software on these machines is kinda flakey and the manuals are almost useless. There are a lot of bugs in the vision software that bite you. I supported mirea/meridian equipment at a past job and my memory is a bit fuzzy, but here are
Electronics Forum | Tue Jun 12 20:54:34 EDT 2018 | dekhead
I don't recall a "Heavy Pallet Rails" option in software; I believe you need to change the Remote Board Stop to "Not Fitted" and move the pneumatic and electrical (BSK6)connections to correspond with the camera mounted board stop. Pretty well detaile
.gif)
