Electronics Forum | Fri Jun 04 19:10:46 EDT 1999 | Ed R
Jason, Are you aware that this UIC machine is a Sanyo 60 series HSP. You can contact NSA(US agent of Sanyo) in Irving, TX for service info. I don't know if UIC is supporting the 60 series any longer. Their phone number is 972-831-9700. Hope this h
Electronics Forum | Tue Mar 30 08:11:42 EST 2004 | steveliu
Hi, Has anyone here get some experience with SMT connector soldering? We were having really hard time to solder this AMP 50/50 Grid connector. Every connector installed has a few pins just sit on the solder. We use AIM 293DX2B NC solder paste, 60
Electronics Forum | Mon Apr 19 20:54:34 EDT 2004 | dave
Rob: We're never heard of paste related problems caused by humidity that is too low. Low humidity is very expensive to control. So, when you think about all the assembly used to be done in the Bay Area. You'd think there would be more talk about i
Electronics Forum | Thu Aug 26 13:51:57 EDT 2004 | Dreamsniper
I've done a few capacity and capability studies and bought new SMT equipment (Pick and Place) based on the above required capacity. I did not rely on equipment manufacturer's tact time. I used only 60% of their tact time as achievable in real manufac
Electronics Forum | Tue Jun 07 03:47:51 EDT 2005 | vera
hi solcom: kindly check the http://www.hkenterprise.com/szcomfaje we sell the stencil roll: 1)suited for machine:MPM,DEK,JUKI,ERKA,Minami etc. brands. 2)paper type:68g(C1,suitable for dry uses),60g(C100),55g,50g,40g(C60,suitable for vacuum absorbent
Electronics Forum | Tue Mar 14 09:54:34 EST 2006 | slthomas
"45* is a common angle of attack. Squeegee blades are commonly manufactured at 60*. The combination of the angle of attack and the blade angle results in an actual printing angle between the two due to down pressure and flex of the blade." Ahhhh, so
Electronics Forum | Mon Sep 25 14:32:08 EDT 2006 | johnw
Hi Guys looking for some help from you clever dudes,Firstly I am having dificulty convinicing operations that they cant produce more boards than the line is already producing, what I am basing my cycle time on is the following, the longest cycle time
Electronics Forum | Fri Sep 29 07:12:20 EDT 2006 | OZGURV
Hi Guys looking for some help from you clever > dudes,Firstly I am having dificulty convinicing > operations that they cant produce more boards > than the line is already producing, what I am > basing my cycle time on is the following, the > lon
Electronics Forum | Wed May 30 18:05:02 EDT 2007 | fredc
Chunks, Nozzle unfriendly? Maybe it should be called nozzle hostile. Depending on the machine and lighting a nozzle with a 1.8mm tube might work. In English units that would be a .072 OD with a .062 ID. The area such a nozzle would pick from is the 6
Electronics Forum | Thu Oct 02 01:47:57 EDT 2008 | myleb
I'm new to SMT. Now, i'm making program for SPI machine to inscpect for solder paste of SP60-MU. I think this is a very good printer but some times, my program shows only 50-60% of volume transfer; and the average height is very high: nearly 200 pct.
