Electronics Forum | Wed Apr 04 13:33:12 EDT 2012 | rway
We currently have 2 M1 systems. Our false call rate has never been has high as you suggest. There is something wrong with your program and/or inspection algorithms, as you probably already know. You should be somewhere between 1000-1500 vcpmo (fal
Electronics Forum | Sat Oct 29 21:24:30 EDT 2005 | Paul Standeven
The CSM84 family units are 3 headed pick & place machines with mechanical chuck centering technology. They use a beam pointer for fiducial correction. The CSM84V is the same as the CSM84 but has a downward looking fiducial camera onboard in lieu of
Electronics Forum | Fri Jan 10 00:52:46 EST 2014 | mmdashti
Dear Madam/Sir; 1)Unfortunately after some installations and commissioning SMT and THT machines from Beijing Torch (Termway) company in Iran , the quality and operation of these machines seems so so... bad in quality. Because we have some advertise
Electronics Forum | Fri Jul 16 05:24:40 EDT 1999 | Chris May
| I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspecti
Electronics Forum | Fri Oct 06 11:41:11 EDT 2006 | Bill
UP1500 was not a real MPM machine, so not relevant. UP1500 was an SMTech (UK) machine, different sofware, camera, etc.... than an MPM machine. AccuFlex is now real MPM.
Electronics Forum | Thu Oct 22 15:18:07 EDT 2020 | jaguar
I have two ESI-650F vision cards and both have the symptom's that of not recognising the Cameras. Is there any UIC users that had similar issues?
Electronics Forum | Sat Feb 01 04:49:59 EST 2003 | testing
Hi, We currently have several AOIs on our production/test line which I feel as an engineer, are not being used to their true potential. Does anyone have any ideas on how I can improve their use i.e SPC, Placement in the production line etc since we
Electronics Forum | Tue Feb 04 08:32:49 EST 2003 | roertner
In my experience AOI's are good for checking machine setup I.E. first piece inspection. After that the only things they will typically catch are wrong parts, reversed parts, missing parts, and tombstones. I would however suggest getting an AOI with a
Electronics Forum | Thu Aug 19 22:21:57 EDT 2010 | jeffr
If you need a disk, I can get it. You only need a sample USER.MCH file. You can use the sample disc to start both the 84V and 66V but after you must set the configuration of both machines as I do not know your options fitted. You will then need to Ca
Electronics Forum | Thu Oct 05 12:51:27 EDT 2006 | john_smith
cn, Currently we have a DEK265GSX a DEK Infinity and a MPM UP3000 printers and previously had MPM Accuflex,MPM UP1500 and MPM AP24s. No advice for the UP3030. We always had to work on all of the MPM printers for one thing or another and every time we