Electronics Forum | Mon Aug 13 09:49:35 EDT 2012 | rjlatz
I just got back from a visit to our PCBA manufacturer. We have good flowthrough on the PTH, but solder skips and bridges on the SMT SO IC's. We have correct orientation and robber pads, but the results are still the same. I noticed the wave shape is
Electronics Forum | Mon Feb 27 06:18:32 EST 2012 | sarason
I am just releasing Version 1.0.0.9 Beta Release Added feeder swapping. minor fix in Mydata TP Sys 2.7 Added more Juki 2000 and 700 series and Yamaha YP/YG machines, more Panasonic machines. Updated Options tab, User interface cleansing Added Check
Electronics Forum | Sun Mar 04 09:53:00 EST 2012 | eadthem
What i have on the original 2 problem boards is the parts next to it are SOIC8 and placed using a 125F(.125" dia) 1 of witch is close and we have to Z zone it to place the SOIC last, the others have more than .02" clearance on all sides. The other
Electronics Forum | Wed Apr 11 17:00:28 EDT 2012 | rodrigo
Hi all, Our cp4 moves rather violently (jerks) all axis when the reset sw is pressed after power up. I've got all sorts of errors after boot up: Servo amp error: D,X,Y, etc Overtravel D,X,Y, etc D clutch error, power off machine We've checked all
Electronics Forum | Mon Apr 16 18:49:40 EDT 2012 | tris101
Hi guys, I'm looking for some tooling parts and I hope you can point me in the right direction. We design basic in house reflow Carriers to surport boards during reflow. I would like to add clamps to our designs but I can not locate any off the she
Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo
Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset
Electronics Forum | Sun Mar 04 01:56:37 EST 2012 | eadthem
What we have had recently is a lot of larger thin (32 thou) thickness boards that have had issues with SC90 diodes bouncing off the pads in the final PNP machine. Our setup, universal instruments GC120 or quad beam 30 spindle lightning heads. This m