Electronics Forum | Wed Aug 07 08:49:35 EDT 2002 | davef
What do you want to be certified? So, do you have a specification control drawing for each component that defines your expected performance capabilities for use by your buyer in acquiring these parts? If there is a reason to fabricate parts to your
Electronics Forum | Fri Oct 13 13:44:03 EDT 2000 | Mike McMonagle
You can achieve a wide range of dot heights when stencil printing by using a polyimide stencil along with a .040 snapoff. Loctite has a system for this that they call Varidot, by varying the size of the apertures in combination with the .040 snapoff
Electronics Forum | Thu Oct 21 14:02:32 EDT 1999 | Ron Costa
We are a contract manufacturer currently building a job with IBM CBGA-255 devices and 20mil QFP's that are close to each other. We use a 6 mil laser cut and electro polished stencil with one to one apertures on the BGA's. The customer is experiencing
Electronics Forum | Thu Jun 06 09:45:14 EDT 2002 | Hussman69
We based ours on the type of paste we use (stencil life) and not so much the machine. Then we coupled that to what 'true' conditions we normally see in our plant, and determined that under these conditions Max & min) our printing process should be g
Electronics Forum | Wed Apr 28 20:57:22 EDT 2021 | stephendo
It will be tough to get a good line for that cost. You might want to start by looking at Mydata and Juki for the machines. Ekra for the screen printer and Heller for the oven is where you might want to start. If you have not already you might want
Electronics Forum | Tue Oct 03 20:35:23 EDT 2000 | Dave F
1. Throughput * Dispenser: Slower, may loose 70% of tact on fast chip shooters * Printer: Can be put in front of and use fast chip shooters effectively 2. Rework Rate ???? Deposition control???? * Dispenser - High control over amount paste - Coplan
Electronics Forum | Tue Sep 07 09:11:33 EDT 1999 | Dave F
| We've noticed that there are many different recommendations for pad sizes for various SMT parts. This seems to vary wildly from manufacturer to manufacturer for the same case sizes. Is there any standards that can used used to specify these sizes
Electronics Forum | Sun Sep 29 09:48:01 EDT 2013 | jvadillo
Hi, we have finally purchased the following second hand equipment: - TWS Quadra pick&place from 2004 - TWS 1100 oven - Motoprint-M automatic screen printer We are quite happy for the price we paid and what we have obtained. The PnP needs some n
Electronics Forum | Mon Jul 07 00:45:39 EDT 2014 | comatose
If you study how the process is done now, it isn't that different from what you describe. Instead of glue, we use solder paste, and instead of spraying it we screen print it. But not that different. For feeding boards we use conveyors instead of rubb
Electronics Forum | Thu Oct 12 22:16:59 EDT 2000 | Dreamsniper
Hi Guys, I'd like to share this to all of you...you can start playing with the rests...Stated prices, if not indicated, are in Aussie $ or Singapore $. Stencil Printing Adhesive Pros a) Less Capital Equipment Cost (Short Term). In reality it is f