Electronics Forum | Sat Jul 26 12:37:10 EDT 2014 | jimmyboz
In the future, please try to explain the situation with some detail. Usually this is the sensor on the 10th station to verify to nozzles are in the up position.
Electronics Forum | Thu Jul 31 13:52:33 EDT 2014 | jimmyboz
I do not recognize that part. Initially, lets disregard that part and try to troubleshoot. DO NOT loosen any bolts associated with the Nozzle change mechanism, else your day, will get worse.
Electronics Forum | Fri Aug 01 06:54:22 EDT 2014 | tegel
Hi, I don't have any solution to the problem, but the component is an EMI-filter and not part of the machine. // Tegel
Electronics Forum | Fri Aug 01 09:21:28 EDT 2014 | jimmyboz
Does it error during nozzle center check, if so, manually switch all holders to small, try center again. It should do about 8 small nozzle centers before error, if so this helps rule out the 10th station, if not check the 10th.
Electronics Forum | Fri Aug 01 11:57:56 EDT 2014 | kurtiss
It turns out it was a misaligned fiber sensor on station 12?, the after rotation nozzle verification.
Electronics Forum | Fri Oct 23 10:40:29 EDT 2015 | kurtiss
The machine will allow more functions other then power off, forgot to press reset button. Any one know what ESC 3 means?
Electronics Forum | Sat Nov 07 13:29:12 EST 2015 | jimmyboz
The machine will allow more functions other then > power off, forgot to press reset button. Any one > know what ESC 3 means? Promise me 3 peanuts and a book of matches, and i will try to find out. I mean, are you still having the problem?
Electronics Forum | Sat Nov 07 13:32:50 EST 2015 | jimmyboz
Oh, IP2, holder 3 is not making the sensor that confirms it is up far enough for the X2 to move. It may even be just timing.
Electronics Forum | Fri Jun 09 07:32:13 EDT 2017 | bukas
it sounds to me like a home sensor. try adjusting sensitivity if possible. move head manually to determine position at which home sensor is activated
Electronics Forum | Mon Jun 12 11:14:10 EDT 2017 | bobpan
Sounds to me like the z-encoder could be a problem. I cant remember but you may be able to disable a head in the system settings. Bob
