Electronics Forum | Thu Aug 15 15:58:12 EDT 2002 | robertnguyen
To whom this may concern, I recently ran into the problem with vias on pads of BGA when place BGA and reflow gas trap on vias escape and result in ball having void greater than 50% of BGA diameter. The BGA pad is measured at 20 mils and the vias mea
Electronics Forum | Wed Oct 30 12:32:10 EST 2002 | dragonslayr
Have you tried doing a reflow of the BGA with the connectors removed? This should solve the question of connector proximity giving you a problem. Also, try rotating the board 90 deg in your rework station before reflowing a BGA. Be sure to rotate th
Electronics Forum | Wed Sep 21 16:25:43 EDT 2005 | GS
IPC-7525 tells you how to make stencil apertures for BGA IPC-7095 tells you how much should be the paste volume in order to get a reliable BGA solder joint. How are your PCB finisced? (HASL, ENIG, OSP, etc?) In case of not HASL, it could be necessa
Electronics Forum | Fri Nov 25 09:31:56 EST 2005 | davef
pyramus, First, search the fine SMTnet Archives for previous discussions on BGA shorts. Second, we're still not clear on the issue. * Is the problem with a BGA? If so, please describe the BGA, including any heat spreader * Is the problem with a uB
Electronics Forum | Tue Jun 20 22:52:10 EDT 2006 | davef
We all know those academic 'reliability studies' are very focused and only give a snapshot of real life. The real reliability studies of leadfree are starting as we scramble to meet our numbers. We have no idea about your customers' expectations ab
Electronics Forum | Mon Oct 30 20:24:35 EST 2006 | davef
As we understand it, you: * Get some nice BGA from your supplier * Find BGA to be packaged properly * Bake the BGA for 24 hours at [what temperature?] to reduce the potntial for damaging moisture sensitive components during following processes * Remo
Electronics Forum | Wed Dec 06 22:35:05 EST 2006 | davef
Questions are: * When you say, "corner of some board's BGA chips", is it on the top of the package or between the board and the bottom of the package? * If between the board and the bottom of the package, does it span the distance between the board a
Electronics Forum | Fri Apr 13 04:10:21 EDT 2007 | CH
We would like to get feedback from users of SMT REWORK STATION especially for BGA's.Dear users, kindly give us ur feedback on BGA REWORK system on the following. 1.Is HOT air based BGA rework system be better than IR rework system.if so pls clarify.
Electronics Forum | Tue Jun 19 19:03:31 EDT 2007 | diesel_1t
Hi folks. If the solder is on the BGA but is not soldered at all on the pads, then you can discard BGA solder issues, by the other hand; you might be experiencing wicking due to heat is being absorbed on component so the balls on BGA are hotter than
Electronics Forum | Tue Jun 26 14:28:50 EDT 2007 | bjrap3
I have been trying to rework a lead-free BGA. For some reason, when I remove the BGA the corner pads on the board come off and the board must be scrapped. If I do manage to remove the BGA successfully, when I solder the BGA, the corners of the BGA