Electronics Forum | Fri Sep 14 19:28:53 EDT 2012 | jlawson
Another oven maker not so famous in USA probably but very strong in EU and high end Asia companies is Rehm Thermal Systems (germany), you should take a look..... They have many years in Reflow same time as Heller been in business, but they use highe
Electronics Forum | Wed Mar 01 11:39:15 EST 2017 | ivammendes
Thank you guys for the answers. I have solved a part of the problem. I replaced the caps that Rob mentioned and some blowers start working. I still have problems with 2 heats. One of them the blower is not working even changing the cap. The other one
Electronics Forum | Thu Jul 23 13:23:45 EDT 2020 | bmalhi
Small components blown issue could be due to one of the below. - Process issue; Make sure solder paste is fresh, if flux is drying out it will not hold parts properly. Check downward pressure of Pick Place. SOT may have to be pushed a little harder i
Electronics Forum | Thu May 18 10:48:09 EDT 2006 | vikkaraja
Hi There, I used to have a similar problem with all of our new heller ovens. I converted them with fan blower controller kit. It is really easy to do or you can have done. Its about $900/oven. For now if you do not feel like investing any money , go
Electronics Forum | Sat Dec 17 16:46:45 EST 2011 | eadthem
Startup current depends on your configuration. ours dose zones 1,2/ 3,4/ 5/ 6,7 last i checked it pulled about 40-55 ish on start up and 25-35 during run. our profile is a slow ramp till 170c then a fast ramp to 285c 280c(last 2 zones). 1707's
Electronics Forum | Mon Mar 20 10:25:30 EDT 2017 | cyber_wolf
@ Westshoredesign: Go take the top covers off your XPM's. Tell me if you see flux residue on the blower motors and the surrounding area. If you see this, grab ahold of the blower motor and rock it back and fourth. It is moves, the seals are melted o
Electronics Forum | Thu Aug 29 15:51:21 EDT 2019 | spoiltforchoice
&gt; If quality or Reliability is the key.... BTU, <BR> &gt; Soltec Vitronics..Rehm... If it is the money <BR> &gt; ...probably not these brands.....:) <BR> <BR> Well I
Electronics Forum | Fri Jun 01 07:41:55 EDT 2007 | mmjm_1099
Thanks all for the input... got elements and blowers changed out and didnt seem to bad.
Electronics Forum | Tue Jan 31 15:21:53 EST 2017 | emeto
Most probably some of your convection blowers don't work.
Electronics Forum | Tue Nov 13 00:05:11 EST 2012 | eadthem
Typical problems with our heller 1707 EXL would be blower issues. We have almost replaced every blower on the top sense purchase. Fortunately Heller is very good about honoring there warranty on the blowers which is quite long, Might be lifetime not
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
