Electronics Forum | Mon Jan 28 16:05:27 EST 2013 | jdengler
It's been a long time since I did this. I think if you get a cable (maybe from some of the used equipment dealers that advertise here) you will still need to change the contacts of the relay the Fuji uses. I think they use a normally closed set of
Electronics Forum | Thu Jan 13 15:08:22 EST 2022 | emeto
Hello Jeff, error is telling you exactly what it is - communication problem. CAN interface is interrupted somewhere. Motors are constantly sharing position and commands with computer over CAN interface. To get this message means somewhere this circui
Electronics Forum | Mon Sep 27 12:01:19 EDT 2004 | lgroves
John, My best guess is the "Y" encoder - or the encoder cable. The encoder is a part of the motor assy on the QSA-
Electronics Forum | Wed Jan 26 12:45:52 EST 2005 | sasha
Jerry, Thank you very much. It work now. Sasha
Electronics Forum | Fri Mar 11 10:51:28 EST 2005 | Micheal
Changed the one from the head board, but no luck. Just wondering if it could be the Quad Align Cable?
Electronics Forum | Wed Apr 06 07:59:17 EDT 2005 | cyber_wolf
Did you check the ribbon cables on either side of the X axis for cracks ?
Electronics Forum | Thu Dec 22 07:10:50 EST 2005 | pjc
http://www.belden.com/ They pretty much do it all. Top quality from my experience.
Electronics Forum | Wed Dec 27 13:16:12 EST 2006 | Cmiller
You should be able to trim the crimp part of the contact then just solder the wire onto the terminal.
Electronics Forum | Wed Jan 03 12:46:43 EST 2007 | rgduval
I have an older TP9, with a programming station monitor, and a machine monitor. Both are RGB input monitors, with the cable coming from the MyData to a y-coupler on the machine monitor, and a cable running to the programming station. The monitor on
Electronics Forum | Mon Jan 08 12:21:57 EST 2007 | realchunks
Most conveyor companies can supply you with some for a price.
