Electronics Forum | Sat Nov 08 21:48:42 EST 2014 | sonavc
ETC then you see TEACH. But I can't see it. Do my machine need to update the software or chane some thing in the Proper program?. I'm using MCS16 computer. So far the machine runs great , But take me awhile to move to correct fiducial location Thank
Electronics Forum | Tue Nov 11 21:21:54 EST 2014 | sonavc
Thank you, that is help, I always change in program and re-transmit. One more question, I program N_data with capacitor is TANTB (using M nozzles in part data). but when I run the program in machine it is always use S nozzles to pick the cap. TANTB
Electronics Forum | Thu Nov 13 13:12:57 EST 2014 | jimmyboz
Are you using MCS1 or MCS2 software on the MCS16? For MCS1 I would have to try and remember, haven't seen that software in 20 years. For MCS2 in the PD make sure nozzle size, nozzle size min, and nozzle size max are all set to Med.
Electronics Forum | Thu Mar 17 12:49:12 EDT 2016 | mnorthey
Thanks every one. I fixed the problem. It was the VM1540A I/O board. Now run back to normal Glad to hear you got it going, I have a Fuji repair manual if you would like to have it. I also have some old circuit cards I don't need anymore. Let me
Electronics Forum | Fri Aug 05 16:42:12 EDT 2016 | jdengler
When the clutch engages the nozzle correctly does it clear the engagement sensor at the end of the brake arm? I don't remember the actual name of this sensor but it clears when the drive gear properly engages the nozzle. This ensures a zero setting
Electronics Forum | Wed Aug 24 11:32:08 EDT 2016 | mnorthey
Did you get your problem solved? I don't remember exactly what I did for that problem but it may have involved changing a servo or driver card. I do have a copy of the calibration/repair manual if you want it. I also have some Nozzles NC-1410 (1.0
Electronics Forum | Wed Oct 19 11:39:40 EDT 2016 | mnorthey
If it is anything like the CP3 there is a programming issue that places parts that are not there, useful when you run out of parts and will be hand placing them before reflow. I don't have a machine or manual anymore but I remember the problem quite
Electronics Forum | Fri Oct 23 03:29:24 EDT 1998 | TONY B
| | We currently using the Panasert SMT machine where PCB flow | | direction were from right to left, & we are planning to move | | in the FUJI -CP3 & CP4-2 in line where standard PCB | | flow direction were left to right. | | Any comment on FUJI mac
Electronics Forum | Fri Nov 18 08:13:57 EST 2005 | Rob
I know plenty of 1980's CP3's & IP1's still out there, and the CP4's & 6's, IP2's & 3's are still going very strong after a decade or so & still commanding top dollar second hand. It depends on how well a machine is made & the type of engineering u
Electronics Forum | Thu Apr 16 14:46:54 EDT 1998 | Doug Carter
| Has anyone Ran parts on the CPII taller than 4mm? | If so, what adjustments were made to the machines to accomodate such a part? The cp 3 we own can not place 4 or 5 mm parts in the middle of the program. They have to be placed at the end of the
