Electronics Forum | Thu May 26 16:55:51 EDT 2011 | jlawson
If you having bad rotations as main issue this should be fixed at SMT programming side before needing inspection. There are software tools that can eliminate this issue and first article inspection related to rotation errors can be eliminated. ie sti
Electronics Forum | Fri May 22 11:42:52 EDT 2020 | ccouture
It's good you were able to access the secret screen. Counter overflow I think relates to the machine having lost it's machine origin position data. Do you have a printer in the machine to print the machine data? This is very long time ago for me, an
Electronics Forum | Wed Jun 04 06:37:10 EDT 2003 | cdowny
I am looking into pick and place for medium to medium-high production with semi frequent changeovers. I have been looking for a little while and nosed around at APEX also. I am not interested in any used products, I have been down that road before
Electronics Forum | Tue Jan 16 07:07:17 EST 2007 | tk380514
Answers: The component does take solder, no problem We get a full barrel fill with an empty PCB but only on one of the holes, the other hole has so much copper around it. The flux reached the top of the PCB when I tested the empty PCB. The IPC-A-610
Electronics Forum | Mon Feb 05 10:12:32 EST 2007 | slthomas
The use of booties isn't required per se, just considered a standard step necessary to reach the 10,000 target. You also need to vacuum (central vac system, NOT exhausting into the room) daily, mop weekly, have a one piece floor, blah, blah, blah....
Electronics Forum | Fri Mar 26 11:31:34 EDT 2010 | rway
I have been using ICT for a number of years. It is still a viable resource for catching defects in the production process. AOI doesn't catch everything, such as bridging on QFN or J-lead devices (this will depend on the type of AOI and camera syste
Electronics Forum | Wed Feb 16 01:06:13 EST 2011 | vinitverma
Dear Gabe, Once you have the mount data in the program, you can move the camera automatically to the location by tracing each location one by one. If I remember it correctly it is done by having the location highlighted in the program and then by pr
Electronics Forum | Mon Jul 05 10:15:01 EDT 2021 | aurash
I bought KE2050R in 2020 and started nicely all in good order and after 2 days the HDD died on me. I wish I have made a mirror. I manage to make a HDD from scratch and I recalibrated the machine from because I had calibration data stored in flash (I
Electronics Forum | Tue Jan 23 10:43:52 EST 2001 | marys
What recommendations do you have for evaluating the needs of a company in terms of this kind of software and needed hardware? What software do you recommend? Is there data available that clearly demonstrates the advantages of adopting a system like
Electronics Forum | Wed Jan 07 12:09:40 EST 2004 | Kris
Hi All, Does any body have any information on hot bar lead free soldering ? Need papers or experimental data ASAP Thanks