Electronics Forum | Tue Jun 13 08:27:19 EDT 2006 | wrongway
Hello Mark level 4 error need to header initialize its under program data as far as mdI01 error looks like a flag field error check the F field for the item codes or fiducial codes. MDI03 error fiducial mark is not aquired need to aquire the f
Electronics Forum | Fri Jul 31 12:53:58 EDT 2009 | dyoungquist
On our Mydata machine, we place a piece of scrap bare pcb next to the pcb we are loading. Using double sided tape, we attach the cut tape strip to the bare pcb, then program the machine to pick up the parts from that location. The smallest Mydata m
Electronics Forum | Thu Apr 12 17:49:35 EDT 2012 | rodrigo
I've done the Fuji flush. It does the same thing. We can not load proper again because it does not communicate with either the F4G or MCS/30. I was able to boot into mechanical mode at one point but now I can not do that either. This thing is drivi
Electronics Forum | Fri Nov 07 11:13:35 EST 2014 | dyoungquist
We have run Mydata machines for 10+ years with no ESD damage from the machine itself that we know of. Can you tell us how you have verified it is the machine causing the ESD damage? It seems to me the ESD damage would be far more likely coming from
Electronics Forum | Fri Jan 17 09:17:49 EST 2020 | sumote
Hello all. We recently purchased a DEK Hroizon to replace our aging 265 machine. The 265 had an auto-loading stencil setting known as a "Distance To Image" where it would place the stencil directly over the board. The Horizon 2 has no such feature.
Electronics Forum | Fri Jul 31 09:48:15 EDT 2009 | dyoungquist
You can use cut tape on Mydata machines fairly easily. We are a high mix, low volume manufacturer who has to use cut tape often as that is what our EMS customers provide. It is does take more time to load/unload than a reel does so you need to fi
Electronics Forum | Tue Feb 04 05:15:40 EST 2014 | spoiltforchoice
Take a look at the ROI tools supplied my MyData and others and draw inspiration from there. Presumably if you are looking at a higher speed line you are looking at higher throughput than you currently achieve or possibly fewer/shorter shifts? The eco
Electronics Forum | Sun Dec 21 04:27:44 EST 2014 | leadthree
Are you really sure that related to my issue? Anyway, in the meantime I experimented a bit with a PVC supplier and now I have a soft PVC that can handle my 185°C (365°F) for 90 Minutes. It becomes a little bit yellow - the previous got cat-black.
Electronics Forum | Thu Jan 23 18:34:15 EST 2020 | slthomas
It's hard to poka-yoke loading reels onto the machine (either a inserter-sequencer or a sequencer, then getting the sequenced reels properly indexed). The only way I know of to make sure they've been set up properly is with visual inspection of EVERY
Electronics Forum | Thu Apr 29 14:46:14 EDT 2021 | mishafockin
We currently have Yamaha/Assembleon Opal with heller 1800. I think we can start with just a printer and PnP. I am open to a refurb printer but would like to get a new PnP. I understand it costs a minifortune but working out bugs and lack of maintenan
