Electronics Forum | Thu Jul 21 01:29:07 EDT 2005 | matjen
We are using Fuji-Flexa software and we are not sure where to go in the software to check the proper data. If anyone has Fuji-Flexa software and could direct us in the right direction please let me know. Thanks.
Electronics Forum | Tue Oct 11 07:54:26 EDT 2005 | Mark
254 (odd parts) ........ go into the Flexa program and go over the vision number and click on it and than hit F1 for a list of numbers.
Electronics Forum | Thu Apr 27 19:19:26 EDT 2006 | ____
nobody know? Nobody cares. You need to contact the Fuji office that will handle the new location of the machine. FLEXA is a piece of software. Good luck getting it transfered.
Electronics Forum | Tue Jul 22 07:35:14 EDT 2008 | jdengler
Hi AJ, I do not know flexa software but the CP4 machines have the nozzle sizes in the header of the placement program for MCS2. Jerry
Electronics Forum | Wed Feb 18 11:36:37 EST 2009 | aj
Hi all, I have a proto build of 3 cards - the 3 cards are being supplied on the same panel. what is the best way to program this on Fuji Flexa - each card will have a lot of the same references e.g C1 , C2 etc... aj...
Electronics Forum | Tue Mar 17 16:43:26 EDT 2009 | gregf912
AJ, you are making this harder than it realy is. Import the cad file with the BOM. Then use the panalize function built into Flexa to step and repeat for block 2 and 3. The ref. designators will be tied to each block (board).
Electronics Forum | Tue May 26 11:56:30 EDT 2009 | mmjm_1099
I also use Flexa but we use QP3 and our vision number is 20. I would feel they are comparable libriares.
Electronics Forum | Tue Mar 30 16:02:19 EDT 2010 | jlawson
Does anyone know how to export Part Data from Flexa into CCIMF format - just want the parts only no board of Placement info etc? Is this possible ?
Electronics Forum | Wed Jul 18 00:35:13 EDT 2012 | fujiphil
If you have the backup files for your program and proper. Try to flush-out the machine memory. Then try again to report CP4 to flexa. If the reporting went good, the communication must be ok. Resend the proper and program.
Electronics Forum | Sun Feb 17 23:33:08 EST 2013 | mdang
Hi All, Is anyone out there has a CD of the FLEXA 4.6.1? Please let me know. Thanks, -Michael