Electronics Forum | Mon Aug 22 11:49:59 EDT 2005 | pjc
Fixed spray head performance depends on board width. If you are looking for complete top-side hole fill, the flux penetration into the lead-hole will be more in the center and less on the ends because of the fan pattern spray. For board widths over 6
Electronics Forum | Wed Oct 11 22:23:39 EDT 2006 | billwestiet
I've installed a number of these machines here in the US, several of them with VOC free applications. I would need to get a bunch of questions answered before I could make any suggestions: What is the pcb width? length? conveyor speed? flow rate (mm
Electronics Forum | Thu May 17 10:02:43 EDT 2007 | slthomas
It's been years, so take my comments as being worth what you're paying for them. ;) Sounds like it could be running out of memory space. I don't remember anything about being able to clear it or whether or not the exec shares space with anything els
Electronics Forum | Wed Jun 18 01:47:25 EDT 2008 | sleech
Innovative Drying Co., considered this possibility early in our experiments. The rate of chamber pump-down is not a consideration. However, the selection of the vacuum pump is critical. Avoid oil-sealed pumps at all costs. A poorly maintained oil-tra
Electronics Forum | Tue Jul 13 13:37:23 EDT 2010 | pjc
That's cold compared with this specification from a leading oven mfr.: Flow Rate - 1.0 - 3.0 US gal/min (3.79 - 11.4 l/ min) • Inlet size and pressure - 0.5 in. male NPT; 310 - 483 kPA (45 - 70 psi) • Pressure drop - 200 kPa @ 11.4 l/min (30 psi @ 3
Electronics Forum | Mon Mar 21 02:54:58 EDT 2011 | kemasta
Hi Dave I agree with the 2nd point (sloppy process management) if the failure rate is higher than 5%. But this is 0.083% case, and only happen once in the blue moon. As I study about the re-flow profile for the last whole week, current parameter se
Electronics Forum | Mon Jan 19 16:27:32 EST 2015 | heath
I was wondering if there are any Austin American Nanojet owners out there who would be willing to share their experiences. We purchased one on the recommendation of someone in the industry, but our experiences is quite different from the "Set it and
Electronics Forum | Wed May 12 23:33:04 EDT 1999 | Matt
WARNING: This is a plug. I have read post on this site where the question is raised: "My machine can do 80 units per hour, but I am only getting 35 - WHY?" Well I have written w95/database code that reads FUJI output files (CPII,CPII,IP2 etc) and d
Electronics Forum | Fri Jan 10 10:09:42 EST 2003 | mantis
Hi In selecting or substituting a capacitor for use, consideration must be given to (1) the value of capacitance desired and (2) the amount of voltage to be applied across the capacitor. If the voltage applied across the capacitor is t
Electronics Forum | Tue Jan 10 14:44:42 EST 2006 | greg york
Not sure about Sn/Cu/Ni large market share here in Europe as we have a large part of the UK market with SACP0307 alloy 0.3%Ag introduced over Two years ago Also worked against Sn/Cu/Ni alloy with large TV Co and they went with 0.3%Ag due to reliabili
