Electronics Forum: fuji and xml (Page 10 of 20)

New Pick and Place Operation

Electronics Forum | Tue Jan 17 05:02:33 EST 2006 | grantp

Hi, I was replying to this thread appearing suddenly. However I have run both machines, and I paid for them myself because I run my own company, and so the choices I made, I personally had to pay for. Also, anyone who's been on this forum for a whi

Re: SMD Inspection and Touch-up

Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony

There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing

Fuji Pick and Place Machines

Electronics Forum | Sat Jun 05 08:18:03 EDT 2004 | vinitverma

Hi Grant, If you're really looking for speed, I'm sure you're looking for another machine for doing the QFPs, BGAs stuff etc. In that even, why not have a look at the long proven Assembleon FCM machine!! It is a totally different concept with UNMATC

New Pick and Place Operation

Electronics Forum | Tue Mar 28 07:28:25 EST 2006 | Rob C

I would have to disagree on this. My experience is that you should never justify capital expediture based on just the obvious up front costs alone. There is no mention of risk of recall, warranty costs, scrap costs,and so on. Which you may get from a

tape splicing pros and cons

Electronics Forum | Wed Sep 21 12:30:03 EDT 2005 | Rob

Hi Greg, We've used lots of machines over the years & seen lots of different tape related issues - the main one being snap off of the cover tape, usually due to too much glue, over entusiastic heat seal, or a feeder requiring maintainance. Also the

DEK 265 and FUJI Board Loader

Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel

I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long

How Can I generate Pick and place files from Eagle

Electronics Forum | Tue Aug 14 07:47:06 EDT 2018 | sarason

Use my program PCBSynergy http://www.members.iinet.net.au/~sarason/ It will read an Eagle XML Brd file and generate over 80 different Pick and place files from 11 different manufacturers. You can also use it to generate a PCBCSV file that can also

Market share fo Panasonic, Fuji and Aseembleon

Electronics Forum | Sun Dec 03 23:50:58 EST 2006 | saiwong

It depends where. In Asia, Panasonis is no. 1, Fuji the second.

DEK 265 and FUJI Board Loader

Electronics Forum | Mon Nov 29 13:01:35 EST 2004 | bobsavenger

I have a DEK 265LT screen printer and a Fuji bare board loader. I cannot get the two machines to talk through the SMEMA cable. I have the personality card for the DEK and I have the correct cable for a FUJI machine. Is there something that I nee

Fuji NP-133 and Universal Flex Jet

Electronics Forum | Wed Apr 14 22:23:09 EDT 1999 | wil allen

We are currently looking into purchasing either a Fuji NP or Universal Flex jet machine. Does anybody have any feedback from running these machines in a production environment? I now that a limited number of each machine has been released so far.


fuji and xml searches for Companies, Equipment, Machines, Suppliers & Information

Flux-Free Reflow Soldering

One-stop Platform For All Your Need For SMT - QYSMT
High Throughput Reflow Oven

High Throughput Reflow Oven
FPC* - Fluid Pressure Control - Dispensing Pump

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.