Electronics Forum | Sat Jun 24 13:08:09 EDT 2023 | madisreivik
All is OK now. The machine was offline couple months and probably some memory battery is dead. All problems were solved after uploading prop data to IP and MTU.
Electronics Forum | Wed Jun 21 06:10:36 EDT 2023 | madisreivik
Thanks ! I totally forgot that MTU had its own prop file, uploaded it from Flexa and now works fine.
Electronics Forum | Fri Jun 23 21:10:29 EDT 2023 | meher
To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being se
Electronics Forum | Sun Sep 03 10:05:36 EDT 2017 | unisoft
Hi Unisoft's ProntoGERBER-CONNECTION should help you. ( http://www.unisoft-cim.com/gerber_connection.htm ) -------------- ProntoGERBER-CONNECTION ( http://www.unisoft-cim.com/gerber_connection.htm ) imports raw Gerber data and allows the user to ad
Electronics Forum | Mon Mar 09 16:28:48 EDT 2020 | sportsradar
Hello Sarason, Unfortunately the machine is no longer supported and we are such a small company we can not afford to replace this machine. Thank you for your advise, I will check for additional parts stuck in the machine (long shot but worth the time
Electronics Forum | Mon Mar 16 12:10:59 EDT 2020 | emeto
Katrina, it is one of both: 1. Communication error - try to initialize machine with line controller OFF. This should tell you if machine can initialize on its own and if the problem is on the machine. Try without the feeder carts, look at the cards
Electronics Forum | Wed Apr 11 08:14:55 EDT 2007 | mmjm_1099
I did my directory by using the Fuji Part Data Directory. You can request one through Fuji and have a copy for all programmers. For instance a 3216 resistor is named RECT3216060 or your electrolytic caps ALEC4343540. Hopefully that is what you are as
Electronics Forum | Fri Nov 08 12:18:56 EST 2013 | dhruv_trylene
Thank you JimmyB for your suggestions. Let me work on that!
Electronics Forum | Mon Oct 28 12:12:58 EDT 2013 | dhruv_trylene
hi all, Could anyone kindly share the part data file/library for the fuji flexa software please? being new to this assembly world, i would like to have fewer part rejections due to part data and thus any tips/suggestions in this regards would be hi
Electronics Forum | Mon Nov 04 11:16:14 EST 2013 | cyber_wolf
What you are asking is not practical. ALL parameters in the part data are key. When parts get rejected, there is an error code generated at the machine. You need training and this is not something that is quick and easy if you have no experience.
