Electronics Forum: hi--we (Page 10 of 48)


Electronics Forum | Tue Jan 25 04:27:39 EST 2011 | ghcarnu

Hi, We used Abzol for cleaning the smt assembled boards; now this solvent is not available any more in Europe. Does anyone knows a replacement for this solvent ?

Yestech AOI experiences

Electronics Forum | Tue Aug 02 09:46:49 EDT 2011 | emeto

Hi , we have the same machine and exactly the same problems. I was thinking that a software update might help with both problems, but we still don't have it. In my opinion they are both software issues.

MSD Control Implementation using Cogiscan

Electronics Forum | Tue Aug 14 08:44:44 EDT 2012 | ducati

HI, we use the SMT Tower software to controll it. The Tower is afully automated storage which controlls the humidity. Is a component leaving the Tower, the time is runnig. Is the Component back in the Tower, the time is stopped.

Fine Pitch Wave Soldering

Electronics Forum | Tue Mar 08 19:37:17 EST 2011 | Jacki

Hi We did some evaluation to solder 0.4mm pitch by Wave. We found that there were many solder shorts at Sockets pins so it made touch up time longer. Please advise me someone has achieved the fine pitch soldering by wave. Thanks in advance.

5 zone oven profile

Electronics Forum | Wed Mar 30 17:32:55 EDT 2011 | gaz

Hi, We are using ws488 sn100c paste. Anyone have a profile for a 5 zone oven that has worked well for you?

vitronic model m4021

Electronics Forum | Thu Jul 14 22:02:12 EDT 2011 | datech

Hi we had just purchase a used vitronic reflow oven, can anyone know to assist us on the user ID (system) for default password. also we need to have the manual and both electrical and operation thank you in advance vincent low

vitronic model m4021

Electronics Forum | Mon Jul 18 23:13:07 EDT 2011 | datech

hi, we need the electrical and operation manual for the oven, can anyone assist us on this thank you in advance best regards vincent low

Reflow Oven

Electronics Forum | Wed Aug 17 12:07:29 EDT 2011 | emeto

hi , we have Heller 1808 and I would say that is doing good job as oven. However for less than 3 years we had to replace 6-7 blowers. There are very nice machines in the market, but it really depends on you and how much money you are ready to spend.

Juki KE750 for 0201 component ?

Electronics Forum | Thu Aug 25 17:31:10 EDT 2011 | emeto

Hi, we have 740 and I would never assume that it can place 0201. The new Juki machines like 2060 1080...can do it for sure but older machines I doubt it.

Fuji QP341 MTU-9 problems

Electronics Forum | Fri Nov 04 13:08:32 EDT 2011 | dwoodbury

Hi. We are having problems with what appears to be the firmware for our QP341 machine. It will not allow us to calibrate or change any settings for the pick-up-point on the tray unit. We are following the procedure in the manuals but it is not workin