Electronics Forum | Mon Oct 18 08:02:35 EDT 2010 | marusha
Hello, colleagues! Please help make a choice! (MY500 + MYDATA MY100 + Heller Mk1707) or (Dec Horizon03 + Samsung 421 + Essemtec RO400FC-C) or very cheap Korean equipment (Sj InnoTech; HP-520 + Mirrae Mx350P + TSM; A70-i71). The volume of required c
Electronics Forum | Tue Sep 15 17:03:18 EDT 2020 | edvardvojvoda
Hello! We have a DEK Horizon 03i paste printer. When we load a new program at change over, most of the time it lost the reference point for the camera axes. After that the fiducials coordinates changed automatically to minus values. The service said,
Electronics Forum | Fri Oct 02 13:55:58 EDT 2020 | lesfarnacer
hi , need help please with my DEK Horizon 03i , we trying to programme a longboard 600mm on the printer and board lengh on our printer is limited to 510mm . I checked on the hardware eve thing is ok but in the software we don't have the longboard op
Electronics Forum | Thu Feb 17 17:33:34 EST 2022 | mnorthey
Hi all, I have a Dek 265 Horizon that fails to print at the correct pressure. It fails pressure every pass. I am trying to Calibrate it with a PFR1200N pressure Tester which we use for our DEK 248 Printers. I am trying to build up the table height
Electronics Forum | Mon May 02 21:26:23 EDT 2022 | rob1
I have a problem with DEK 265 Horizon. During camera being homed after checking the fiducials, the camera failed to home properly and crashed into the back of the machine in the Y direction. I homed the camera in the Y and it appeared OK and I could
Electronics Forum | Wed Jan 24 15:49:32 EST 2024 | carlos_s39
Hi all, Recently the place where I work at purchased an SMT assembly line. The stencil printer is a used DEK Horizon 03i. We received no manuals with it and are having issues with the cleaner. The motor does not move and it does not move along the ra
Electronics Forum | Fri Oct 13 15:55:53 EDT 2000 | Dave F
Guys, two things: 1 Fluxes have different probing chaacteristics. Consider broadening your horizons. 2 Look at SMTnet thread ... ICT Fixtures No-Clean Flux - Cartman 14:04:14 03/16/2000
Electronics Forum | Tue Jan 06 15:22:49 EST 2004 | browning
Grant, Sorry for the delay in a response, I just got back into the office from the holidays. I have 265's, Horizons and Eclipses.
Electronics Forum | Thu Feb 19 17:03:50 EST 2004 | Grant Petty
Hi, We settled on a high end DEK Horizon printer, and thanks to everyone for the info. The machine arrives on Monday, so this will be good! Regards, Grant Blackmagic Design
Electronics Forum | Mon Feb 23 13:12:55 EST 2004 | Mark
I have used MPM 3000 and Dek 265 Horizon. We always just fill them up with regular old alcohol. Cheapest and easiest way to maintain.