Electronics Forum | Wed Jul 11 22:48:54 EDT 2012 | joeion
It is correct to remove moisture in PCB by baking. But I think the time and temperature is too little. According to our experience, it should be more than 60min at 120 centigrade degrees.
Electronics Forum | Thu Jul 12 02:15:53 EDT 2012 | thmeier
Check also the specs / recommendations of your PCB manufacturer. We bake boards 4h/120°C before reflow and after automated cleaning (it´s not FR4!) and also if we have to rework with the autometd rework- stations (massive IR underheating ,..). Regar
Electronics Forum | Fri Mar 23 10:31:12 EDT 2018 | emeto
You should answer two questions. 1. Were the components placed? 2. If first answer is "Yes" Are there components in the oven?
Electronics Forum | Sat Aug 11 09:33:09 EDT 2007 | davef
Tran First, you never spoke of J-001DS in your initial post. Second, J-STD-001DS requires no baking of assemblies, only boards [and for the anal, components]. J-STD-001DS, 4.9.3 Drying/Degassing. Prior to soldering, the assembly shall be treated to
Electronics Forum | Thu Jul 05 11:26:08 EDT 2012 | cobham1
I need help with how long do I need to bake out double sided PCB's that have been cleaned. The units will not be reworked but instead will be moved on to hand stuffing. I have looked in IPC CH-65B and J-STD-033C. I get information for parts if I am r
Electronics Forum | Thu Jul 12 11:56:20 EDT 2012 | hegemon
You might try to complete all your soldering within a 72 hour or less time frame. For all intents treat your board like a moisture sensitive component after you have baked and completed SMT reflow. Wash, blow dry, and go direct to stuffing and com
Electronics Forum | Tue Feb 22 19:21:05 EST 2000 | Peter
I like MPM's 500 machine. I purchased the predecessor model when it was made by SMTech. This machine has programmable pin supports which made setting up for double sided boards really easy. For auto alignment, I think only in-line machines have th
Electronics Forum | Tue Feb 22 19:21:05 EST 2000 | Peter
I like MPM's 500 machine. I purchased the predecessor model when it was made by SMTech. This machine has programmable pin supports which made setting up for double sided boards really easy. For auto alignment, I think only in-line machines have th
Electronics Forum | Tue Aug 14 19:49:21 EDT 2007 | htran
My apology for not mentioned the J-STD-001DS. I didn't mean to trick you. Anyway thanks for your inputs. You are the man with the smt knowledge, I am sure that I will be asking you for some more answers again. Thank you for the link. I will loo
Electronics Forum | Fri Aug 17 17:55:42 EDT 2007 | htran
My small reflow oven doesn't have the rails (only metal mesh). I personally don't think it was built for double side reflow assembly and there is vibration as well. We are a small low volume mfg house and our reflow oven doesn't have the capability t