Electronics Forum | Thu Aug 16 17:16:14 EDT 2007 | wayne123
put the tubed parts on the side of the machine that is desired and then when optomizing in the condition portion set it to "feeders move within table" simply setting it to feeders move will result in the parts moving from front to rear and visa versa
Electronics Forum | Tue Sep 18 10:52:14 EDT 2012 | sarason
Sounds like a plan. The usual way is to count how many you use on the job either by pre-calculation. Or how many clicks the machine counts and save the data before switch off, then drop it back into a spread sheet. This depends very much on the mach
Electronics Forum | Thu Aug 14 19:09:41 EDT 2014 | takram
I purchased the JW-3040 manual printer after seeing this company here. They were advertising the JW-3040 as new but their website said they specialize in used products. I specifically asked and was assured that the printer is new and comes with a squ
Electronics Forum | Wed Sep 02 20:18:18 EDT 2015 | sarason
Are your PCB's stretched or is it that the films that were used to make your PCB's distorted.Thus vias and TH's don't align. These things will probably be picked up in bare board testing , but depending on the amount of offset may get through, to yo
Electronics Forum | Thu Apr 22 13:43:14 EDT 1999 | Steve Gregory
Hey Ya'll! Have any of you ever worked with one of V-Tek's "Economax" tape and reel machines? The biggest thing I'm curious about is the type of cover tape that these machines use. It's something they call P.S.A. (Pressure Sensitive Adhesive)cover t
Electronics Forum | Sun Apr 25 02:58:58 EDT 1999 | Haim H.
| Hey Ya'll! | | Have any of you ever worked with one of V-Tek's "Economax" tape and reel machines? The biggest thing I'm curious about is the type of cover tape that these machines use. It's something they call P.S.A. (Pressure Sensitive Adhesive)c
Electronics Forum | Thu Jan 27 16:43:15 EST 2005 | russ
Ther is a solder alloy out there that is supposed to allow lead free wave processing without having to upgrade pumps and such or increasing the pot temp (direct drop in). I have not used it nor do I plan on doing leadfree wave soldering but you may
Electronics Forum | Wed Nov 19 18:51:22 EST 2014 | warwolf
your summary is pretty accurate! yeah our justification on the automatic system is long in the pipeline. we would need significant volume even then we could just bump the staff numbers. I can see how you are having troubles with the legacy requirem
Electronics Forum | Thu Feb 10 10:28:56 EST 2000 | Russ
Okay, Okay, here is the rest of the story! These boards were definitely plated, reworked to HASL, The component that is the most succeptable is a 160 pin QFP .5mm pitch. This component has nickel/iron lead frame. Significantly reduced apertures (1
Electronics Forum | Tue Jan 23 22:38:43 EST 2001 | rpereira
I have recently completed a HUGE screen-printing DOE. I used Taguchi methodology and man I got good results! Here is what I learned for what it's worth: (p.s. to the MPM apps guy I sent a copy to Tim Gillis, Lou Fuda, etc...) EFab vs. Laser: EFab
.gif)
