Electronics Forum | Thu Sep 21 20:37:21 EDT 2006 | basem
Does anyone on this forum has experience with any of i-PULSE SMD placement systems? I am looking at the M4e. Also, can someone advise me on what to choose if the desired final circuit is of very high density and small pitch (0.5mm)? I am considerin
Electronics Forum | Fri Jan 28 14:07:00 EST 2005 | davef
We're not in Chicago, nor are most of the used equipment contacts listed below. Why is that important? * Broome Engineering, 1010 Conklin Rd. Conklin NY 13748 607 779 5142 fax 7799 Lou Pixley Sales Engineer * Insertech 2398 N Penn Rd, Unit 3, Hatfie
Electronics Forum | Thu Sep 08 17:19:42 EDT 2016 | jasltd
Thanks for the reply, unfortunately I need to place the label prior to the placement machine as I need the placement machine to read the barcode of the board as it enters the machine to provide component traceability.
Electronics Forum | Thu Dec 30 12:17:19 EST 1999 | JAX
Marlies, The terms are one in the same but are used according to how you descibe the situation; i.e. centering refers to adjusting the part where as aligning normally deals with adjusting the vision. NOT THAT THIS IS A RULE. ( different strokes...
Electronics Forum | Thu Jan 27 07:18:14 EST 2000 | Christopher Lampron
Dennis, The solder paste is responsible for holding the component in place pre-reflow. Several things to look at: Is the paste accurately printed on the pad? If not, there may not be enough of the component in contact with the paste to provide adiq
Electronics Forum | Wed Oct 13 03:38:21 EDT 1999 | Paul Gerits
Hi Morris, I work as a technical consultant, application specialist for Philips EMT (SMT machine suplier). For cost per placement complex calculation can be made. To make a easy one just to hav an idea you can use following. Information needed: Pr
Electronics Forum | Wed Sep 16 04:43:28 EDT 1998 | Michael Fogel
Does anybody knows of a used placement machine that can handle boards (Back-plans) of 650mmL x 550mmW with placement area of 500mm x 540mm ?
Electronics Forum | Wed Nov 16 14:44:31 EST 2011 | olddog
Bobpan, thank you for your speedy response. As to the items you noted: 1. I did a test of Funct 30 for the first 5 nozzles, 2 times each as follows: noz1 Ht=215 & 219, center=1005 (all nozzles all tests), run out 2.2 & 2.7. Noz2 Ht=228 &228, runout=
Electronics Forum | Thu Nov 17 15:57:41 EST 2011 | olddog
Hi Bobpan, Regarding "second", the results of the test are no difference - still rejects the part. I tried 2 mils, 3 mils, 5 mils, 7 & 9. I changed the tolerances fron about 15% to 20%+. By the way, I did put on the new nozzle and it is still the sa
Electronics Forum | Thu Jan 27 10:22:21 EST 2000 | JAX
Dennis, Not sure why your so secrative about what machine but I guess it doesn't matter. When you start placing 0402 & 0603 packages the difference between height and width and length gets lost in tolerance. This allows the machine to pass parts t
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774