Electronics Forum | Thu Sep 10 17:25:40 EDT 1998 | Dave F
| Hi, | I'm having trouble getting good profiles for a couple of BGA's we're placing in small quantities and was hoping someone with SRT Summit 1000 experience might be willing to share some information regarding profiles, etc. | Thanks. | Rick Thomp
Electronics Forum | Fri Apr 10 05:52:45 EDT 1998 | raymond
| | Does anyone has any experience using the Prophet Thermal Manager by KIC Thermal Profiling for real time monitoring and control of reflow oven profile ? | Yes. What is your concern. | Earl Moon I would like to find out how accurate is the device
Electronics Forum | Sat Sep 22 09:07:56 EDT 2001 | davef
Back-stepping a bit. If a profile is being used to: * Set-up the oven for a new product or trouble-shooting process, the profile should be taken with a solid contact to a solder connection. * Monitoring on-going stable and in-control process that re
Electronics Forum | Tue Jun 04 18:14:52 EDT 2002 | arzu
I have the same problem. I made 3 standard profiles on a 6-zone oven, but always advice to make (or at least verify) a profile. But if customers don't want to, I point at the risks, and choose a slightly higher profile to be on the safe side. If you
Electronics Forum | Sat Aug 14 20:40:20 EDT 2004 | Grant
Hi, We are currently using the profiler built into our Soltec oven, but are looking for something better and does anyone have any ideas. We want to be able to quickly analyze the profile against solder paste and component profiles so we can quickly
Electronics Forum | Thu Jun 09 19:09:37 EDT 2005 | Kantesh Doss
We verify oven profiling once a week on a scrap board and enter the data in a SPC Chart. This works out great and I have not noticed any problem. I also like the idea of sending the Profiler through the oven with the thermocouple sticking out to meas
Electronics Forum | Wed Aug 24 08:51:45 EDT 2005 | james
We do have a slimkic and I will be profiling a board asap. Yes I am looking for a quick answer and I know profiling takes some time. It is just hard to get the M. E. to understand what I want. We just never had a cooldown as part of our profile.
Electronics Forum | Sat Aug 26 13:49:38 EDT 2006 | say
Danny, with the Heller 1800 series oven, what is the standard oven profile for lead free. I am having some proble profiling boards with BGA. I am getting alot of voids. If you have a profile for a Heller 1800 nine zone, could you please send me a
Electronics Forum | Fri Sep 08 10:23:38 EDT 2006 | slthomas
By profile (profile has not been changed) are you referring to the oven zone settings or the actual charted profile of a trip through the oven as recorded by a thermal profiler? Some ovens will continue to function without warning as long as temps
Electronics Forum | Tue Nov 21 11:59:43 EST 2006 | billwestiet
These machines are very different. It falls under "there are no two machines alike" category. When you say the same profile, do you mean the same setpoints, or the same actual board profile that you get from running a profiler with TC's on the boar
