Electronics Forum | Mon Mar 19 15:55:54 EDT 2018 | emeto
1. Use ultrasonic cleaner after you manually wipe out the main amount of solder. 2. Ask yourself why you have misprints so often. I work in this industry for 20 years and can't recall having many misprints. Something in your process should be fixed.
Electronics Forum | Tue Jun 12 20:54:34 EDT 2018 | dekhead
I don't recall a "Heavy Pallet Rails" option in software; I believe you need to change the Remote Board Stop to "Not Fitted" and move the pneumatic and electrical (BSK6)connections to correspond with the camera mounted board stop. Pretty well detaile
Electronics Forum | Thu Feb 07 12:04:11 EST 2019 | davef
Over the years, Bob has contributed many videos and pictures that have help identify and solve production issues. I recall a vid of a bug-up BGA being heated to liquious that showed the balls swelling in the heat to the level that they bridged. Bril
Electronics Forum | Wed Jul 10 22:13:45 EDT 2019 | SMTA-Ray
I don't recall if the heater wattage is the same or not for the different pots. If the wattage is different then the PID algorithm is also different. this anticipated when & by how much the heater will overshoot its setpoint and turns the heater off
Electronics Forum | Fri Nov 22 16:59:43 EST 2019 | dwl
I'm worried about the voids that you have on the heel fillet of the leads. Off the top of my head, I don't recall if/what the IPC spec is for voids in gull lead fillets is but my gut instinct is that you're compromising the mechanical strength of the
Electronics Forum | Thu Jun 25 10:40:24 EDT 2020 | kumarb
Hi. Did you get this issue resolved? 1) do you have the Yamaha manual for the many options for such definition? I recall examples including odd shaped shields and connectors that may work. Let me know if you need this manual. 2) have you phoned Yam
Electronics Forum | Mon Oct 12 17:25:09 EDT 2020 | rgduval
Release the e-stops :) Chances are pretty good that one or more of the e-stop switches is going bad. Pop them off, and measure with an ohm-meter to figure out which one it is, and replace. I don't recall anything in the software that identified wh
Electronics Forum | Tue Jun 14 18:12:59 EDT 2022 | emeto
Typically when you install equipment, you generate some maintenance schedule based on manufacturer's recommendation. For certain equipment we do Ppk analysis on intervals to prove it works in spec. If equipment is in spec and working as expected, the
Electronics Forum | Mon Aug 01 15:54:27 EDT 2022 | tey422
I ran those KE750 & KE760 machines more than 5 years ago. As I recall, it can do some sort of gang pick, just not fully simultaneously. It picks with one head first then, it picks up with the 2nd head with minor delay after the 1st pick.
Electronics Forum | Thu Mar 28 17:13:11 EDT 2024 | tey422
It's been long time, me memories are fading away. If I remember correctly, you would need small flat surface plate or something to cover up the "linescan" hydra camera, so from the reflections value then it can calculates the actual height "lowest"
.gif)
