Electronics Forum | Thu Apr 25 07:40:52 EDT 2019 | SMTA-Matthew
Try http://www.sipadssd.com for some help with surface mount components. Made for small runs.
Electronics Forum | Tue Oct 07 22:15:12 EDT 2014 | padawanlinuxero
How to avoid /reduce warpage in long length PCB & > _1.6MM THICK PCB. You need to put it in a fixture or pallet to run it in the reflow oven, most common material use here is durostone for the pallets that we run in the reflow oven, we use Durosto
Electronics Forum | Mon Jul 01 04:58:50 EDT 2019 | SMTA-David
Hi, I have been looking around for an 8 zone reflow oven with convection heating top and bottom and computer control for setting up and storing profiles. The Chinese company "Jaguar" have a couple of models at reasonable price that look like they wo
Electronics Forum | Wed Jan 07 13:17:56 EST 2004 | James
We currently have 2 HVA 102 conceptronic reflow ovens. I ran 2 profiles on the 2 seperate machines. One of the oven ran 7 degrees lower than the other oven. I checked all the fans and they seem to running fine. I get no warning on the monitors.
Electronics Forum | Thu Mar 28 20:40:35 EDT 2019 | sarason
I built myself a reflow oven using an off the shelf 29l fan forced oven with digital controls. I then fully insulated the cavity around it with kiln fibreglass, and added a metal infill at the back as the back of the oven was just a metal sheet. Anyw
Electronics Forum | Fri Mar 29 11:46:13 EDT 2019 | emeto
I have used the Chinese ovens that Manncorp is selling bought from another supplier and they can do the job. These will do the job. You can manufacture metal piece(plate) slightly tilted to collect the boards behind the oven(similar to wave soldering
Electronics Forum | Wed Mar 17 22:04:05 EST 1999 | Dave F
| Looking for a company that makes a small batch reflow oven. Not a belt-style convection oven, but a cabinet style that can 125 c to 150 c. | | Thank you | Matt: The batch ovens we looked at were very difficult to program. They seemed to want t
Electronics Forum | Fri Mar 15 08:25:42 EDT 2013 | torch
looking for a bit of advice really, our current reflow oven (surfair 510) is in the process of slowly dieing so we are in the market for a replacement. I havent followed technologies on ovens for a while but im looking for something that is low to m
Electronics Forum | Mon Oct 04 16:47:15 EDT 2004 | dgjjr
I'm looking for Quad ZCR 941 parts outside of the Tyco pipeline. Anyone know of a good reseller with access to Quad oven parts? dj
Electronics Forum | Tue Oct 27 18:07:39 EDT 2009 | burb1999
Have 8" metal exhaust going out the oven to the roof and no filter or flow meter. Have used a filter and flow meter before, anyone have any info on this or where to purchase the needed items? Thanx, Todd
Capital Equipment Solutions - SMT | PCBA | TEST
Equipment Dealer / Broker / Auctions
113 S Main Street
Lodi, USA
Phone: 6083431779