Electronics Forum | Tue Mar 14 14:42:43 EDT 2017 | nqgiao
My MPM 2000 gave me a message " Camera is not parked" during reset the machine. Please help me with this issue.
Electronics Forum | Tue Mar 28 19:28:54 EDT 2017 | aemery
Giao, These style of MPM's use stepper motors, but no feedback like an encoder or a resolver. In other words all axis positions are assumed after "Reset" of the machine. Because of this style of drive system there is the potential for the vision ga
Electronics Forum | Tue Apr 11 08:41:44 EDT 2017 | jdengler
Do you have an interlock bypass key? If you do can you reset the interlock in bypass? If you cannot, I believe there is a pico fuse on the interlock pcb in the control panel that may have blown.
Electronics Forum | Fri Feb 02 05:11:29 EST 2018 | deanm
I developed our company's procedure for moisture sensitive devices based on J-STD-033 and I don't recall anything requiring a certain ramp rate. Furthermore baking at 85C will greatly extend the time to reset the clock and it is harder to maintain
Electronics Forum | Fri Dec 21 10:16:23 EST 2018 | jdengler
When an older Fuji machine acts odd the first place to go is a reset start and reload proper, program, and status to see if that fixes it. Just make sure you have a good proper before you begin. Jerry
Electronics Forum | Wed May 08 06:43:07 EDT 2019 | paulanderson
I have also reset and checked all the inputs are working and all seem OK. Would be grateful if some one could confirm the home sequence, so I can at least start looking there first Thanks in advance
Electronics Forum | Wed May 08 09:17:51 EDT 2019 | bobpan
push the 2 left buttons on the membrane panel after releasing the e-stop....this should get you into diagnostics....you then need to reset the system parameters. It may home then. good luck, Bob
Electronics Forum | Mon Dec 23 11:41:09 EST 2019 | michealsean
After saving the changes I've made to running-config on my Cisco L2 Switch, I restart the Switch, but all settings are resetting. I have the IOS image I downloaded here. Should I upgrade the Switch's IOS software?
Electronics Forum | Wed May 06 17:05:43 EDT 2020 | bobpan
Did you release the emergency key and then press stop and reset twice on the machine?
Electronics Forum | Mon Feb 08 11:52:15 EST 2021 | mendez
I spend several hours resetting both chips and no luck. I have a question: The lcd not displaying could be the main controller board? Does anyone sell parts for this machine ?