Electronics Forum | Mon Apr 15 10:03:39 EDT 2019 | kylehunter
Ahh that makes a lot of sense. All the boards I will be doing for the next while will be leaded, so I think I'll start with the 1500, and then worst case upgrade later if needed.
Electronics Forum | Mon Apr 15 12:36:04 EDT 2019 | robl
We found the blowers were usually fine, but the capacitors strapped to the blower motors were failing. They were under $5 each from Digi/Mouser/Allied/RS. Worth keeping a few around. Last place had 12 Hellers including a 1500 doing ROHS with no is
Electronics Forum | Thu Apr 25 10:00:25 EDT 2019 | SMTA-Gregory
I would suggest you look a the Sikama International Falcon 5 benchtop reflow system, Economical, reliable and good value. You may be able to get one on the used equipment market.
Electronics Forum | Wed Nov 06 07:27:47 EST 2019 | kylehunter
To do that requires a calibration scale, which we don't have. But even if it is out of calibration, it still wouldn't explain why it states that the setpoint is 5kg always, even when it is set to 12kg.
Electronics Forum | Mon Sep 25 20:00:02 EDT 2023 | fuji_user_2014
I need to remove solder mask from a ground plane for rework purposes. What is the best method for doing this in the scale of 1000-1500 units? Recommended tools?
Electronics Forum | Mon Jul 24 18:19:08 EDT 2000 | Darby
Nick, Like John says, it will only be a short time and you will "just know". In the meantime you might want to try - 1. All the placement machine manufacturers have show pcbs for the exhibitions, many of these show pitch and package types on the silk
Electronics Forum | Thu Dec 09 14:10:42 EST 1999 | se
Fiducial recognition is based on finding the centroid of the gray scale density of the fiducial. Round fiducials are easier for the software to digest in most cases, but its more important what the camera sees. Gray scale or color contrast of the fi
Electronics Forum | Mon Oct 04 03:48:02 EDT 1999 | Chris May
| What is the average pay that a SMT Programmer would get? The machines would be Fuji and Universal. | This is going to open up a can of worms involving phrases relating to monkeys and peanuts. I have come across a spectrum of scales depending on the
Electronics Forum | Mon Oct 04 03:52:26 EDT 1999 | JAX
| | What is the average pay that a SMT Programmer would get? The machines would be Fuji and Universal. | | This is going to open up a can of worms involving phrases relating to monkeys and peanuts. I have come across a spectrum of scales depending on
Electronics Forum | Thu Apr 29 17:33:30 EDT 1999 | Steve Gregory
Just curious, Are any of ya'll coming out here to the Chip scale and BGA National Symposium out here in Santa Clara, Cal-i-for-ni-yay next week? I'm a-goin'...gonna learn more about them little buggers...I just know enough now to be extremely dange