Electronics Forum | Wed Sep 18 18:41:17 EDT 2002 | davef
People have made good comments. Additional points are: * Your bridging is probably being caused by one or more of the following: [1] printing too much paste, [2] smearing the paste during placement or subsequent handling, or [3] paste slump during t
Electronics Forum | Mon Oct 03 22:16:58 EDT 2005 | Ken
If that's the case, let your customer go. I have run into this situation recently. Q. Why do you not run a dedicated line for lead free? A. You (the customer) give less than 12 weeks forcast and expect us to have a dedicated line for your product?
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
Electronics Forum | Fri Apr 20 14:11:27 EDT 2012 | rway
Programming is different, yes, but so is the terminology. ///with machine vision you have parameters that select what is good and what is bad, and you have parameters that help make bad look worse and good look better making the difference between w
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
Electronics Forum | Fri Jan 22 15:48:14 EST 1999 | Chrys
| Hello, | | I will be evaluating and qualifying two equipment types. The first is a fountain soldering device. I need practical advice on all the stuff you guys and gals know about as good, bad, ugly, best applications, setup, limitations, and all
Electronics Forum | Sun Nov 08 15:27:25 EST 2015 | davef
Thinner: Flux thinner, NOT paint thinner We kept a spare stone in thinner in inventory. We cut PVC pipe to size, cap in one end, screw thread on the other, stone inside, filled with flux thinner and covered with a screw cap. I don't remember who we
Electronics Forum | Tue Dec 02 08:40:27 EST 2003 | Daniel Werkhoven
Dear Tom, As manufacturer of solder chemicals for the electronic industry we know we can help you out with your problem. To go no clean you most only organise that the chemistry that stays behind on yr PCB will not cause any problem during the life o
Electronics Forum | Wed Mar 31 20:49:11 EST 2004 | marcowong
We are trying to buy used double wave solder and ICT machine and we need some advice on selecting the machine and things to be cautious with. It will be greatly appreciated if someone can offer us good suggestions that will help us to minimise mist
Electronics Forum | Fri May 01 06:49:31 EDT 2009 | davef
minimum space between selective wave soldering pallet's opening to the nearest PTH or SMT pad? * http://www.agicorp.com/pdf_files/Designguidelines903.pdf * http://www.datumdynamics.com/resources/dfm_wavesolder.html?PHPSESSID=a73b3bc8bbd55519bffbb68