Electronics Forum | Wed Jun 21 01:49:10 EDT 2017 | bukas
Thank you Bilal, i am aware that you can't run 3x240 machine at 3x380V, that is why i have delta-delta transformer. It was phase sequence after all, and machine is now running. Thank you all for your help.
Electronics Forum | Wed Oct 18 15:35:11 EDT 2017 | jdprecise
I have an issue with CP4 seeing FIDs but not correcting placement according to new skew angles. Fids in the sequence are linked accordingly. I suspect, it has something to do with the inspection method of the FIDs. SCAN or LEVEL Any Thoughts?
Electronics Forum | Tue Nov 17 05:01:36 EST 2020 | empac
Hi Rob, we have the same problem on our cp40 : no sequence finished from handler could you let me know how you get into the sys.ini ?Thx. David
Electronics Forum | Thu Nov 15 11:05:01 EST 2018 | pharasyn
Thanks for your suggestion, bobpan. We did try that, and also try to trip the cover and flap interlocks, and various combinations/sequences of both. Doesn't want to work.
Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3
hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).
Electronics Forum | Tue Apr 02 18:38:35 EDT 2019 | jstebbs89
Thank you lads for all the help. It happened to be the first solenoid on top of the air muffler. Swapped it out with a newer one, air instantly to the rest of the machine.
Electronics Forum | Tue May 07 08:35:43 EDT 2019 | paulanderson
I Have a SMTech/Quad MV100 Printer and it powers up and system on activates but does not go through home sequence - any ideas? All axis will move in the diagnostic mode
Electronics Forum | Wed May 08 06:43:07 EDT 2019 | paulanderson
I have also reset and checked all the inputs are working and all seem OK. Would be grateful if some one could confirm the home sequence, so I can at least start looking there first Thanks in advance
Electronics Forum | Wed May 08 09:23:34 EDT 2019 | paulanderson
Hi Bob, I already tried this :( Do you know the home sequence, as Im thinking it may be waiting for the first item to complete? Paul
Electronics Forum | Fri Apr 24 17:42:04 EDT 2020 | rodrigo
I checked and the fine theta motor is spinning. Thank you so much for the help.
