Electronics Forum | Wed Apr 03 14:16:16 EDT 2019 | davef
My take ... * Just about every BGA in the world is soldered in a reflow oven * A small portion of the BGA are soldered with rework / repair stations * A very small number of BGA are soldered with hot plates, toaster ovens, selective soldering mach
Electronics Forum | Tue Sep 24 01:57:24 EDT 2019 | sara_pcb
HI, What is the method for testing solder-ability of Class 3 PCBs. The PCBs have through hole & SMT Pads. Solder-ability need to be assessed prior to wiring. Kinldy advise
Electronics Forum | Wed Jan 01 22:19:33 EST 2020 | sssamw
Solder ball attached on solder joint without violation minimum electrical clearance is acceptable. If your process parameter including stencil not changed, suggest you check if solder pasted being pushed out after IC placement, also check if solder j
Electronics Forum | Tue May 04 10:38:24 EDT 1999 | Dave F
| Does someone has experience with solder stop on components to avoid an Viking effect (no solder on the pad, all solder on the lead)? What kind of solder stop does work well? What is dangerous? What has to be kept in mind when using such components?
Electronics Forum | Fri Sep 25 12:26:34 EDT 2009 | clampron
Some information on the web regarding RoHS and tip life... What problems are there for using Lead-free solder? ? Higher melting point of Lead-free solder may cause physical and thermal damage to components and PCB. ? Lead-free solder has poor
Electronics Forum | Fri Oct 08 08:26:03 EDT 1999 | Carol Zhang
| | | I have a board, 4 spacers needed to be soldered on the board | | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, ther
Electronics Forum | Tue Nov 28 21:16:17 EST 2006 | davef
J Rose at EMPF says: The introduction of no-clean solder fluxes in electronics manufacturing has given rise to greater levels of solder balling simply because the opportunity to remove them in the wash process does not exist. They are typically cause
Electronics Forum | Fri Feb 11 09:48:56 EST 2000 | Christopher Lampron
Dear Masdi, Solder beading (as opposed to solder balls) is usually caused by volume of solder paste, displacement of solder paste when component is placed and sometimes the proximity of the solder depositions for that component. Basically, a small a
Electronics Forum | Wed Apr 18 16:57:54 EDT 2001 | marquesj
Hello, Can some body tell me the Constitution of solder paste and the function of these components in the solder? Tanks in advance Marques
Electronics Forum | Tue Oct 12 08:48:16 EDT 1999 | Carol Zhang
| | I have a board, 4 spacers needed to be soldered on the board | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, there wi