Electronics Forum | Thu Jul 26 14:47:49 EDT 2018 | tsvetan
RS274D contain just NC info and requires external aperture file, RS274X combine aperture and NC info together. You can download RS274X format specs and learn them, it's easy to make RS274X from RS274D + aperture file (basically you copy the aperture
Electronics Forum | Mon Oct 15 14:29:58 EDT 2018 | compit
I have an Emerald X machine (by Assembleon) with an LCS. I start production. The first PCB board runs to the end of the LCS (item 1). Each subsequent stop is BEFORE LCS (item 2) - I have to remove it manually. And so until the production reset - then
Electronics Forum | Tue Jun 29 16:03:57 EDT 1999 | Dave F
snip | John and Dave, | | Again, I don't work with larger chip devices with this issue. The company I now work with developed a strategy, based on considerable research (as others of us did in the past), to do things like placing 0603's on 0402 pad
Electronics Forum | Mon Jul 30 11:10:41 EDT 2001 | hinerman
There are several things to look for in a compliant tooling system 1. How much force per pin is required to lock the pins in place? This is especially important since you will be multiplying by the total number of pins on all modules. 2. Is ther
Electronics Forum | Thu Feb 16 09:37:11 EST 2006 | mgillespie
hi, > > we tried to introduce form-flex a few > years back and it caused more problems than it > fixed. > > Switched back to pins and no > problems. > > It might have improved since but I > would be reluctant to get them again unless I was >
Electronics Forum | Fri Aug 28 08:52:13 EDT 2009 | duso02
Yes, you must thin Dow CC for any spray operations. We use Dow 2577 daily for multiple customers and we always thin it for spray operations and 2577 is considered medium viscosity. Dow recommends using up to 60% solvent (Xylene). Your 2620 is low vis
Electronics Forum | Mon Aug 31 11:52:28 EDT 2020 | inspiredmorris20
Hello Jon, I appreciate your reply, correct there are 2 red (24v) that control the main power and 2 blue (they control the power to the units operation keys ready, start, stop, reset, change feeders.) additionally there is a red jumper wire on the E
Electronics Forum | Thu Jan 13 14:16:32 EST 2000 | mike d
Michael, Good afternoon. My experience with the frameless stencils has been less than optimal. I tried the universal stencil system about a year ago and these are my experiences. 1) The stencil manufacturer supplied me with a free frame to try ou
Electronics Forum | Tue Oct 12 11:32:22 EDT 2004 | fastek
Stefen- When looking at it from your perspective only it makes no sense to off-shore. The machines and operators are but a small part that goes into the decision to move overseas. The bigger picture is the fact the "entire" operation gets outsourced.
Electronics Forum | Wed Apr 30 16:00:12 EDT 2008 | tech13108
Hello, We have recently purchased an older MPM via auction and I am trying to get it running but not getting too far. When I power it up it goes thru a boot sequence then a screen appears on the monitor with a "warning cover not closed, close cov