Electronics Forum | Thu Feb 05 19:45:33 EST 2004 | davef
Sure, here's one: Micro-Screen; 1106 S High St, South Bend, IN 46001; 574-232-4358 Fax: 574-234-7496; Cathy info@microscreen.org http://www.microscreen.org We list the following company in our notes, but have never used them: SEFAR AMERICA - MEC P
Electronics Forum | Sun Mar 28 22:17:36 EST 2004 | Grant Petty
Hi, I would also be interested in this thread, but our problem has a different twist to it. We have good results from our reflow with Koki no clean paste, however when we pass the boards through the wave solder machine, the flux in that leaves a fog
Electronics Forum | Sun Apr 04 10:16:16 EDT 2004 | cyclopsn
I'm involved in backplane manufacturing process. There are about 10 electrolitic capacitor assembled in my board.These capacitor are soldered using a selective soldering machine. My problem is that these capacitor will charged up and failed as short
Electronics Forum | Tue Apr 13 21:33:48 EDT 2004 | qualitel
Hi Dreamsniper, It seen this is the major issue had been occurs you.( We had face all this issue last time too) We had done a lot of areospace products before and most of ours products is a must on class 3 spec. BGA is not that tough t
Electronics Forum | Thu Jun 24 20:28:58 EDT 2004 | needhelp
We design PCBAs. Our CM assembles the boards for us. So far we have used waterwash SMT process to build the boards. Accidentally, due to documentation errors, we suddenly have a huge batch of boards built with No-Clean process. Although the boards pa
Electronics Forum | Thu Aug 12 13:34:03 EDT 2004 | gregoryyork
Yes unfortunately solder resist again, getting boring I know. That green stuff on the boards causes all kinds of problems if not applied correctly. Can't blame the flux (as usual) or the process as he has tried all varients to no avail and therosin s
Electronics Forum | Wed Sep 01 14:58:59 EDT 2004 | Shean Dalton
To address the last sentence of the recent posting, Austin American Technology does have experience with board cleaners as described. More recently AAT developed a cleaning system simliar to your description called the AquaBatch. The AquaBatch was
Electronics Forum | Sun Sep 19 10:54:24 EDT 2004 | rohman23
This (along w/ everything else we do) is not high volume. Actually, we're dropping a batch of 7 the first of the week, and that's fairly sizeable for us. I talked with my stencil design folks and sent them a scrap board and all my gerber info. I t
Electronics Forum | Thu Dec 09 11:12:28 EST 2004 | msjohnston1
I was given the task of specifying our next AOI platform for our company. The new Orbotech Symbion P36 machine uses a laser and might have been my top pick, however the machine is so new I was not able to see a demo and the company was unable to run
Electronics Forum | Tue Jan 25 09:01:02 EST 2005 | Marc C
Hi All I work for the supplier mentioned above and just want to pass along some info. OmniFlo ovens use to have timers. They were located at in the electrical box and not in the software but a "mechanical" timer. These were removed from the ove
