Electronics Forum | Fri Sep 23 03:52:41 EDT 2005 | dougs
Hi, Does anyone know if it's possible to place BGA's with pitch 0.5mm and ball diameter 0.25mm on a siemens F3. the manual says that smallest pitch on BGA's is 0.56mm. Siemens won't commit a yes or no, as you'd expect, but i'd have thought it w
Electronics Forum | Thu Jan 12 16:16:33 EST 2006 | PWH
Thanks JAX and Cmiller. I have spec'd "on the head" optics 2.6 mpp. No upward cameras but might "wire" it for magellan digital for future add-on. Will be buying/using prec. pro. feeders but might have to use some old GSM pneumatics from time to ti
Electronics Forum | Tue Mar 07 23:50:35 EST 2006 | karenp
Thanks guys ... you gave me some ideas, I'm trying to use the camera inspection in the gemini, I use it, but i don't have a "Golden dot" as you said Pete, i'm trying with DOE analysis.. I hope can get something good, and help the team with the missin
Electronics Forum | Thu Jun 01 07:40:23 EDT 2006 | netellink
I have a Suzuki vision machine with 4 heads (SMT-1000VL). This machine is using the camera to inspect the nozzels (4 sets) in the nozzel tray changer every time it is going to change the nozzel(s) in the 4 heads. The problem I have is now the machine
Electronics Forum | Fri Sep 22 09:06:33 EDT 2006 | daxman
We've got a problem with our AP25.. I just finished repairing and calibrating this printer. We needed to replace the camera. After the cal. was done, the print accuracy was superb. However, it seems now, the consistency will not maintain itself. T
Electronics Forum | Fri Sep 22 13:03:26 EDT 2006 | daxman
I ran the vision test...here is what I got. Camera System: Completed Repeatability VX mean = -3.177942 Standard Deviation = .000059 VY mean = -12.114077 Standard Deviation = .000065 Vision System: Completed Repeatabi
Electronics Forum | Wed Sep 27 17:06:26 EDT 2006 | daxman
Hey Guys, I checked the histogram...it doesn't look good. I'm assuming the graph for the black bars has to be in the green on the left and the graph for the white card needs to be in the green on the right?? Anyways, I can't find a "GS4 pot" I looke
Electronics Forum | Thu Sep 28 01:30:32 EDT 2006 | fastek
Todd- In light of the reply from an obviously confused Darren, an IP would be a fine "line balancer" in conjunction with your MY-12. Your choice of either an IP-1, IP-2 or IP-3 should be based on the type of components you want to run. You mentioned
Electronics Forum | Wed Jan 24 21:29:43 EST 2007 | davef
Board fabricators commonly use Barco AOI to inspect film. The AccuMatch compares pixel-to-pixel of the Gerber data to the image seen by the AOI camera. It's slower than design rule checking, but has definite advantages [like lower falsing]. Unfortu
Electronics Forum | Wed Feb 21 09:36:10 EST 2007 | hanza
Hello, We are planning to buy a desktop AOI system and were able to experiment with a Mirtec MV-2 system. Results were pretty good, except for some types of solder inspection. I am wondering if anyone has some experience with the Mirtec MV-3 (3D 5-