MPM SPM PROBLEM

Subscribe to Thread

When I flip the switch to lock the stencil, the magnet in th... - Mar 16, 2006 by Sr. Tech

Hey Sr.Tech .. Thanks for you help with my CP6 problems by t... - Mar 28, 2006 by Daxman

HA ! Yes I fixed it a couple days ago. It was too much air ... - Mar 29, 2006 by Sr. Tech

Sr. Tech

#40484

MPM SPM PROBLEM | 16 March, 2006

When I flip the switch to lock the stencil, the magnet in the carriage cylinder pops free.....

Any ideas ?

reply »

Daxman

#40700

MPM SPM PROBLEM | 28 March, 2006

Hey Sr.Tech .. Thanks for you help with my CP6 problems by the way.. Did you just get this machine? We've had many initial problems with ours. Most of them were related to the air pressure settings. There should be 2 regulators on the back of the machine. The main inlet should be regulated to about 100psi, and the second should be about 65psi... Since the frame clamps are pnuematic, I wouldn't be suprised if this had to do with air pressure settings. I'll try to duplicate this issue with ours, and get back to you.

reply »

Sr. Tech

#40707

MPM SPM PROBLEM | 29 March, 2006

HA ! Yes I fixed it a couple days ago. It was too much air pressure causing it.

reply »