msf

Subscribe to Thread

we are using panasert msf machine we encounter there is fi... - Apr 20, 2006 by

Well i wouldn't run every board then!!!! okay seriously, ... - Apr 20, 2006 by RDR

are u using 3d / 2d camera 1) machine setup support pin mu... - May 02, 2006 by

chan

#41098

msf | 20 April, 2006

we are using panasert msf machine we encounter there is fine pitch alignment problem this is not happen every board.

reply »

RDR

#41103

msf | 20 April, 2006

Well i wouldn't run every board then!!!!

okay seriously, All bad parts off the same each time or are they "all over the place"

Check your mount height, you may have sagging or warped boards or just bad part height

reply »

Nirmal

#41323

msf | 2 May, 2006

are u using 3d / 2d camera 1) machine setup support pin must be strong. 2) machine part libary must be perfect and good condition. 3) using the right nozzle. 4) check the board clamp must be clamp fully. 5) and we can also try doit head and camera calibration.

thks .......

reply »