Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Fuji CP4-3

Views: 2003

Hi All, Lately we have been getting a humming noise whic... - Jul 10, 2006 by

Are the axis's lubricated? Check the servo amp null and 0 s... - Jul 11, 2006 by jdengler  

mac

#42640

Fuji CP4-3 | 10 July, 2006

Hi All,

Lately we have been getting a humming noise which seems to be coming from one of the D-axis motors on the CP4.

If it happens the Op. hits the e-stop and resets the machine which clears the noise and machine runs fine.

Obviously there is an underlying problem with the Motor but I would appreciate any comments of what I could be looking at here?

rgd's

mac

reply »


jdengler

#42650

Fuji CP4-3 | 11 July, 2006

Are the axis's lubricated? Check the servo amp null and 0 speed settings.

Jerry

reply »

Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB
SMT Reflow Ovens
Now Online
54
Visitors
1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

IPC/WHMA-A-620 training Nasa Space Addendum
Fluid Dispensing Aerospace
Jetting Pump for Integration

SMT spare parts - Qinyi Electronics