Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Paste sticking to metal blades

Paste sticking to metal blades

Subscribe to Thread

I have an AP25 HiE, first time using metal blades. I have f... - Oct 27, 2006 by David Linhoff

Search the fine SMTnet Archives for background, for instance... - Oct 27, 2006 by davef

do not dispense too much solder paste in the stencil. Keep ... - Oct 30, 2006 by

David- We found success with Permalex blades from Transitio... - Oct 30, 2006 by nodlac

We also use the Permalex blades with good success. We try to... - Nov 01, 2006 by jdumont

Is it possible something is wrong with your solder paste? ... - Nov 05, 2006 by

David Linhoff

#44740

Paste sticking to metal blades | 27 October, 2006

I have an AP25 HiE, first time using metal blades. I have found that the paste is not releasing from the metal blades whether it is fresh or old. It is intermittent at times. Any suggestions?

David

reply »

davef

#44748

Paste sticking to metal blades | 27 October, 2006

Search the fine SMTnet Archives for background, for instance: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=5473

reply »

Thanh Nguyen

#44768

Paste sticking to metal blades | 30 October, 2006

do not dispense too much solder paste in the stencil. Keep paste about haft of the blade hieght.I think it will help.

reply »

nodlac

#44773

Paste sticking to metal blades | 30 October, 2006

David- We found success with Permalex blades from Transition Automation. http://www.transitionautomation.com/squeegee.html

Not that this solves yer problem....

reply »

jdumont

#44828

Paste sticking to metal blades | 1 November, 2006

We also use the Permalex blades with good success. We try to keep around a 5/8" bead on the stencil to help with release.

reply »

KEN

#44889

Paste sticking to metal blades | 5 November, 2006

Is it possible something is wrong with your solder paste?

reply »

SMTnet
»
Electronics Forum
»
Paste sticking to metal blades

High Resolution Fast Speed Industrial Cameras.

High Precision Fluid Dispensers

"IPC training online, at your facility, or at one of our worldwide training centers including our brand-new training center in the Twin-Cities area of Minnesota. Blackfox Training."