Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


JUKI 2050/2060 comments? anyone?

Views: 2602

james

#46994

JUKI 2050/2060 comments? anyone? | 25 January, 2007

I am looking for any comments as far as the JUKI 2050 or 2060 placement reliability? Does anyone have experience with these machines and could give me their input? Thanks

reply »

John S.

#46996

JUKI 2050/2060 comments? anyone? | 25 January, 2007

James, We have 3 750's that are 5-8 yrs old. Never any major issues. Juki's service and support are the best.

We bought a 2060 1 year ago and have been pleased with it. We placed a 20 mil pitch QFP with a spec of +/- 0.003" to test the machine. We found the Cpk to be 1.5 and Cp to be 2.0. Hope that helps, John S.

reply »

james

#47014

JUKI 2050/2060 comments? anyone? | 26 January, 2007

Have you had any placement problems due to pickups being off?

reply »

John S.

#47034

JUKI 2050/2060 comments? anyone? | 26 January, 2007

Not as long as the operators will make sure the part is centered to begin with. The machine can auto correct the pickup coordinate as it runs. John S.

reply »

#47052

JUKI 2050/2060 comments? anyone? | 29 January, 2007

HI, I have ran Siemens for 7 years but just started with a company that purchased a new Juki 2055-RE and a new 2060... These machines have some real nice features on them that I love... Though not as fast as your turrent head machines, I believe the pick and placement reliability to be great.. One feature (pick tracking) virtually assures you that the part will be centered on the nozzle during pick-up and another feature (auto-measure) assures your package dimensions are correct... Nice machines for the price...

reply »

Fluid Dispensing, Staking, TIM, Solder Paste

Solder Paste Dispensing