Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Peelable Mask

Peelable Mask

Subscribe to Thread

Hi All, Anyone having problems with Peelable Mask during ... - Feb 21, 2007 by

we switched to a lead free peel mask and have no pronlems. ... - Feb 21, 2007 by WaveMasterLarry

nothing but... We've had peel-off melting after reflow, b... - Feb 22, 2007 by Loco

Try: * ... - Feb 22, 2007 by davef

now we use Solder mask from peters.de but it too thick so w... - Feb 23, 2007 by

All, We have to run these boards thru Reflow then Wave. ... - Feb 23, 2007 by

burns and melts in the pot sending the solder golden/yellow ... - Feb 23, 2007 by

dave

#47868

Peelable Mask | 21 February, 2007

Hi All,

Anyone having problems with Peelable Mask during Leadfree Process? as in Melting

Dave...

reply »

WaveMasterLarry

#47883

Peelable Mask | 21 February, 2007

we switched to a lead free peel mask and have no pronlems. Maybe you using a leaded version of mask?

reply »

Loco

#47899

Peelable Mask | 22 February, 2007

nothing but...

We've had peel-off melting after reflow, burn up and turn hard and brown, melt in the holes and then turn hard... All very hard to remove afterwards. We have yet to find a proper solution.

reply »

davef

#47901

Peelable Mask | 22 February, 2007

Try: * http://www.peters.de

* http://www.atotech.com/peelable-solder-mask.html

reply »

josaf

#47933

Peelable Mask | 23 February, 2007

now we use Solder mask from peters.de but it too thick so we can't use process for screen epoxy

reply »

dave

#47935

Peelable Mask | 23 February, 2007

All,

We have to run these boards thru Reflow then Wave.

The mask looks like it has gel'd after reflow and then jsut burns after wave.

Alan...

reply »

greg york

#47961

Peelable Mask | 23 February, 2007

burns and melts in the pot sending the solder golden/yellow and drosses like mad. Lackwerke pieters germany ( not sure on spelling) Lead Free version works well,if you need the exact code I will get for you. cheers greg york

reply »