Low humidity dry cabinets for MSD

Subscribe to Thread

Has anyone been using low humidity dry cabinets for storing ... - May 03, 2007 by mazemach1

We have a "McDry" cabinet. It works well. ... - May 03, 2007 by SWAG

While you're waiting for others to reply, search fine SMTnet... - May 03, 2007 by davef

We use Super Dry. The oldest ones are about 5 years old and ... - May 04, 2007 by Darby

If you're looking for something for less than $5-10k, you sh... - May 07, 2007 by hoss67

mazemach1

#50092

Low humidity dry cabinets for MSD | 3 May, 2007

Has anyone been using low humidity dry cabinets for storing moisture sensitive devices?

Any suggestion on the right equipment vendor? Thank you.

reply »

SWAG

#50093

Low humidity dry cabinets for MSD | 3 May, 2007

We have a "McDry" cabinet. It works well.

reply »

davef

#50095

Low humidity dry cabinets for MSD | 3 May, 2007

While you're waiting for others to reply, search fine SMTnet Archives => dry and cabinet

reply »

Darby

#50110

Low humidity dry cabinets for MSD | 4 May, 2007

We use Super Dry. The oldest ones are about 5 years old and we haven't had a problem.

reply »

hoss67

#50139

Low humidity dry cabinets for MSD | 7 May, 2007

If you're looking for something for less than $5-10k, you should consider setting up a point-of-use air drying system. If you can supply fairly dry air from a house system to the point of use dryer, you can acheive humidty levels below 2% easily.

We use LA-MAN equipment for drying. It's hooked up to a basic dry cabinet with grounded shelves and we have a constant RH monitor hooked up. This whole system was put together for about $2500 and we are running below 1% RH.

Check out http://www.laman.com/extractor.htm.

reply »