gloves used for wave soldering and pallets

Subscribe to Thread

What kind and what brand of gloves are people using for hand... - Sep 20, 2007 by John S

As long as your operator is grounded, a pair of welders glov... - Sep 20, 2007 by Hussman

As sources for heat resistant gloves, try: * National Safet... - Sep 20, 2007 by davef

we use welders gloves with cuffs. there are some other heat... - Sep 21, 2007 by RDR

John S

#51851

gloves used for wave soldering and pallets | 20 September, 2007

What kind and what brand of gloves are people using for handling hot wave solder pallets? My operators are going through a pair a week. I need something better. Thanks

reply »

Hussman

#51852

gloves used for wave soldering and pallets | 20 September, 2007

As long as your operator is grounded, a pair of welders gloves is fine. The leather kind do not build up static and do last a while. If the same pair of gloves is being used for dedrossing the wave, pay special attention to loose fitting gloves. I have seen operators scoop up solder by wearing loose fitting gloves.

reply »

davef

#51859

gloves used for wave soldering and pallets | 20 September, 2007

As sources for heat resistant gloves, try: * National Safety Apparel * Radnor

reply »

RDR

#51865

gloves used for wave soldering and pallets | 21 September, 2007

we use welders gloves with cuffs. there are some other heat gloves out there as well, we like the durability of leather though

Russ

reply »