Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Could this capacitor be my problem?

Views: 3104

#52845

Could this capacitor be my problem? | 8 December, 2007

I have a JVC home stereo and it just started shutting off roughly a couple of seconds after turning it on. I took off the cover and found a capacitor that the plastic coating on the outside peeled off. Could this capacitor be my problem, the reason why its shutting off like that? If not, what could be my problem? If so, where could I take this to get it fixed? I'd rather not attempt the electric work. Who or what should I look for in my area that could work on this for me? Any help would greatly be appreciated. Thanks

reply »

#52847

Could this capacitor be my problem? | 9 December, 2007

#52848

Could this capacitor be my problem? | 9 December, 2007

The only thing JVC has told me was to take it the whole way to New Jersey to the closest service center.

reply »

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

One stop service for all SMT and PCB needs