Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
CP642 Camera replacement

CP642 Camera replacement

Subscribe to Thread

We have a problem with our wide view camera on our CP642. D... - Jan 16, 2008 by scotceltic

Try Bill Lockwood at SMT Research. He may have a pdf versio... - Jan 16, 2008 by jdengler

Bill is no longer with SMT Research. The camera cal/replace... - Jan 17, 2008 by Sr. Tech

I went to class a long time ago and I have the procedures. I... - Jan 18, 2008 by vikkaraja

My fax number is 248-848-9462. Any procedure would be appre... - Jan 22, 2008 by scotceltic

Sorry I did not response to you sooner. I will do my best to... - Jan 24, 2008 by vikkaraja

Hey, It's not so bad, but you'll need nozzle jigs to measur... - Jan 25, 2008 by Daxman

All set. Thanks for providing the procedure. ... - Jan 28, 2008 by scotceltic

scotceltic

#53228

CP642 Camera replacement | 16 January, 2008

We have a problem with our wide view camera on our CP642. Does anyone have the replacement procedure laying around ? We need to replace it and Fuji is telling us that it is proprietary info. unless you have been to the class. Well we have a few guys that have been to the class years ago but who remembers that stuff.

reply »

jdengler

#53230

CP642 Camera replacement | 16 January, 2008

Try Bill Lockwood at SMT Research. He may have a pdf version of the advanced maintenance book. bill@smtresearch.com

Good luck, Jerry

reply »

Sr. Tech

#53240

CP642 Camera replacement | 17 January, 2008

Bill is no longer with SMT Research. The camera cal/replacement on CP6 is better off left to the pros.Unless your techs are VERY familiar with the procedure.

Call Greg Frazier @ 704-995-4591 he is with SMT Resource. Greg has done work for us in the past and we were very satisfied.

Tell him Dave at TTApsco referred you.

reply »

vikkaraja

#53254

CP642 Camera replacement | 18 January, 2008

I went to class a long time ago and I have the procedures. I just have to find it. Just make sure you maintenance person knows what he or she is doing. It just takes a little patience. E-mail me your fax or phone number

reply »

scotceltic

#53294

CP642 Camera replacement | 22 January, 2008

My fax number is 248-848-9462. Any procedure would be appreciated.

Alan

reply »

vikkaraja

#53353

CP642 Camera replacement | 24 January, 2008

Sorry I did not response to you sooner. I will do my best to get that info. to you as soon as possible.

reply »

Daxman

#53379

CP642 Camera replacement | 25 January, 2008

Hey, It's not so bad, but you'll need nozzle jigs to measure camera angle and resolution and also a good dial indicator. I'm pretty sure that I have the pdf's handy as well. send me an email at meshuga@sasktel.net. I'll be able to send you the info you require.

reply »

scotceltic

#53395

CP642 Camera replacement | 28 January, 2008

All set. Thanks for providing the procedure.

reply »