How much air flow is required for an Omni Flow 5 oven?

Subscribe to Thread

We are looking at an Omni Flow 5 Oven and do not have much i... - Feb 15, 2008 by rkeck

This is from the OmniFlo 5 Engineering data sheet: EXHAUS... - Feb 15, 2008 by PeteC

rkeck

#53668

How much air flow is required for an Omni Flow 5 oven? | 15 February, 2008

We are looking at an Omni Flow 5 Oven and do not have much information on it. We do know it has a 3" cabinet vent and a 6" vent near the center on the top. If anyone has knowledge of this oven, and has any suggestions or info, we would appreciate it. Thanks in advance, RK

reply »

PeteC

#53673

How much air flow is required for an Omni Flow 5 oven? | 15 February, 2008

This is from the OmniFlo 5 Engineering data sheet:

EXHAUST SPECIFICATIONS: STANDARD AIR OPERATION: - Load-end: 150 cfm (255 m3/hr) at the 4� (102 mm) stack (minimum requirement) - Unload-end: 300 cfm (510 m3/hr) at the 4� (102 mm) stack (minimum requirement) - Water gauge pressure drop: 1.0� (25 mm) for each 4� (102 mm) stack on the machine INERT ATMOSPHERE OPERATION: - Load-end: 150 cfm (255 m3/hr) at the 4� (102 mm) stack (minimum requirement) - Unload-end: 150 cfm (255 m3/hr) at the 4� (102 mm) stack (minimum requirement) - Water gauge pressure drop: 0.5� (12 mm) for each 4� (102 mm) stack on the machine Note: All specified exhaust requirements listed above are minimum values. The external exhaust connections are the same for both standard air and inert atmosphere machines. The internal connections to the lip vents are configured according to the air or inert atmosphere machine configuration.

reply »